using DataBlockHelper.DBHelpers;
using DataBlockHelper.Entity.DB2104Entity;
using DataBlockHelper.Entity.DB2106Entity;
using Mesnac.Action.Base;
using Mesnac.Action.ChemicalWeighing.AutoControl.DB;
using Mesnac.Action.ChemicalWeighing.AutoControl.Entity;
using Mesnac.Action.ChemicalWeighing.LjMixManager;
using Mesnac.Controls.Base;
using Mesnac.Controls.Default;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Windows.Forms;
using Button = System.Windows.Forms.Button;
using Mesnac.Action.ChemicalWeighing.LjPlanning;

namespace Mesnac.Action.ChemicalWeighing.AutoControl
{
    internal class GelerWeterControl : ChemicalWeighingAction, IAction
    {
        private List<Control> McControls;
        RuntimeParameter _runtime;
        GelerWeterControlsEntity ControlsEntity = new GelerWeterControlsEntity();

        public void Run(RuntimeParameter runtime)
        {
            base.RunIni(runtime);       //必须要调用

            this._runtime = runtime;

            McControls = GetAllControls();

            ControlImport();

            try
            {
                BottomSelect(runtime);
            }
            catch(Exception e)
            {
                MessageBox.Show("请检查输入内容格式是否正确！");
            }

        }

        private void BottomSelect(RuntimeParameter runtime)
        {

            #region 自动参数下传

            if (ControlsEntity.Download == runtime.Sender)
            {
                if (MessageBox.Show("确认下传数据？", "下传确认", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.No)
                {
                    return;
                }

                int bin1 = Convert.ToInt32(ControlsEntity.ChooseMaterial1.MCValue.ToString());
                int bin2 = Convert.ToInt32(ControlsEntity.ChooseMaterial2.MCValue.ToString());

                List<RecipePlcView> recipes = new List<RecipePlcView>();

                float t1 = Convert.ToSingle(ControlsEntity.MaterialTolerance1.MCValue.ToString());
                float t2 = Convert.ToSingle(ControlsEntity.MaterialTolerance2.MCValue.ToString());

                if(bin2 == -1)
                {
                    if (t1 < 0.1)
                    {
                        MessageBox.Show("公差不能小于0.1！");
                        return;
                    }
                }
                else
                {
                    if (t1 < 0.1 || t2 < 0.1)
                    {
                        MessageBox.Show("公差不能小于0.1！");
                        return;
                    }
                }

                RecipePlcView recipe1 = new RecipePlcView()
                {
                    Bin = (short)StockMaterrialDbHelp.GetCodeById(bin1),
                    Set = Convert.ToSingle(ControlsEntity.MaterialWeight1.MCValue.ToString()),
                    Tolerance = t1,
                };
                RecipePlcView recipe2 = new RecipePlcView()
                {
                    Bin = (short)StockMaterrialDbHelp.GetCodeById(bin2),
                    Set = Convert.ToSingle(ControlsEntity.MaterialWeight2.MCValue.ToString()),
                    Tolerance = t2,
                };

                recipes.Add(recipe1);
                recipes.Add(recipe2);

                List<Step> steps = new List<Step>();

                Step step1 = new Step()
                {
                    MixCode = 1,
                    MixSpeed = Convert.ToSingle(ControlsEntity.GelSpeedSet.MCValue.ToString())
                };
                Step step2 = new Step()
                {
                    MixCode = 2,
                };
                Step step3 = new Step()
                {
                    MixCode = 3,
                    MixTime = Convert.ToInt16(ControlsEntity.GelPosTimeC.MCValue.ToString()),
                    MixTemp = Convert.ToSingle(ControlsEntity.GelPosTimeA.MCValue.ToString()),
                    MixSpeed = Convert.ToSingle(ControlsEntity.GelNagTimeB.MCValue.ToString())
                };
                Step step4 = new Step()
                {
                    MixCode = 4,
                };
                Step step5 = new Step()
                {
                    MixCode = 5,
                    MixTime = Convert.ToInt16(ControlsEntity.GelWaterTime.MCValue.ToString())
                };
                Step step6 = new Step()
                {
                    MixCode = 6,
                };
                Step step7 = new Step()
                {
                    MixCode = 5,
                    MixTime = Convert.ToInt16(ControlsEntity.GelWaitTime.MCValue.ToString())
                };
                Step step8 = new Step()
                {
                    MixCode = 7,
                    MixTime = Convert.ToInt16(ControlsEntity.GelCloseHeatTime.MCValue.ToString()),
                    MixTemp = Convert.ToSingle(ControlsEntity.GelOutDelayTime.MCValue.ToString())
                };

                steps.Add(step1);
                steps.Add(step2);
                steps.Add(step3);
                steps.Add(step4);
                steps.Add(step5);
                steps.Add(step6);
                steps.Add(step7);
                steps.Add(step8);

                List<MixStep> mixSteps = new List<MixStep>();

                MixStep mixStep1 = new MixStep()
                {
                    MixCode = 1,
                };
                MixStep mixStep2 = new MixStep()
                {
                    MixCode = 2,
                    SetValue = Convert.ToSingle(ControlsEntity.WetDryWeight.MCValue.ToString())
                };
                MixStep mixStep3 = new MixStep()
                {
                    MixCode = 3,
                    MixTime = Convert.ToInt16(ControlsEntity.WetMixTime.MCValue.ToString())
                };
                MixStep mixStep4 = new MixStep()
                {
                    MixCode = 4,
                };
                MixStep mixStep5 = new MixStep()
                {
                    MixCode = 5,
                    MixTime = Convert.ToInt16(ControlsEntity.WetOutDelayTime.MCValue.ToString()),
                };

                mixSteps.Add(mixStep1);
                mixSteps.Add(mixStep2);
                mixSteps.Add(mixStep3);
                mixSteps.Add(mixStep4);
                mixSteps.Add(mixStep5);

                List<DeviceMaterrial> materials = new List<DeviceMaterrial>();

                DeviceMaterrial deviceMaterial1 = new DeviceMaterrial()
                {
                    DeviceId = SingleSelect(),
                    MaterrialId = bin1,
                    Type = 2,
                    Code = StockMaterrialDbHelp.GetCodeById(bin1)
                };
                DeviceMaterrial deviceMaterial2 = new DeviceMaterrial()
                {
                    DeviceId = SingleSelect(),
                    MaterrialId = bin2,
                    Type = 2,
                    Code = StockMaterrialDbHelp.GetCodeById(bin2)
                };

                materials.Add(deviceMaterial1);
                materials.Add(deviceMaterial2);

                switch (SingleSelect())
                {
                    case 1:
                        LjPlanningPlcHelp.DownG1Recipe(recipes, steps);
                        LjPlanningPlcHelp.DownM1Recipe(mixSteps);
                        DeviceMaterrialService.Save(materials);
                        break;
                    case 2:
                        LjPlanningPlcHelp.DownG2Recipe(recipes, steps);
                        LjPlanningPlcHelp.DownM2Recipe(mixSteps);
                        DeviceMaterrialService.Save(materials);
                        break;
                    case 3:
                        LjPlanningPlcHelp.DownG3Recipe(recipes, steps);
                        LjPlanningPlcHelp.DownM3Recipe(mixSteps);
                        DeviceMaterrialService.Save(materials);
                        break;
                    case 4:
                        LjPlanningPlcHelp.DownG4Recipe(recipes, steps);
                        LjPlanningPlcHelp.DownM4Recipe(mixSteps);
                        DeviceMaterrialService.Save(materials);
                        break;
                    case 5:
                        LjPlanningPlcHelp.DownG5Recipe(recipes, steps);
                        LjPlanningPlcHelp.DownM5Recipe(mixSteps);
                        DeviceMaterrialService.Save(materials);
                        break;
                    case 6:
                        LjPlanningPlcHelp.DownG6Recipe(recipes, steps);
                        LjPlanningPlcHelp.DownM6Recipe(mixSteps);
                        DeviceMaterrialService.Save(materials);
                        break;
                    case 7:
                        LjPlanningPlcHelp.DownG7Recipe(recipes, steps);
                        LjPlanningPlcHelp.DownM7Recipe(mixSteps);
                        DeviceMaterrialService.Save(materials);
                        break;
                    case 8:
                        LjPlanningPlcHelp.DownG8Recipe(recipes, steps);
                        LjPlanningPlcHelp.DownM8Recipe(mixSteps);
                        DeviceMaterrialService.Save(materials);
                        break;
                    default:
                        MessageBox.Show("请选择一条产线！");
                        return;
                }

                MessageBox.Show("数据下传成功！");
            }

            #endregion

            #region 手动控制

            if (ControlsEntity.GelManualPowder == runtime.Sender)
            {
                if (MessageBox.Show("确认手动下粉料？", "下粉确认", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.No)
                {
                    return;
                }

                bool isReady;

                switch (SingleSelect())
                {
                    case 1:
                        isReady = DB2105WriteHelper.WriteG1Pd();
                        break;
                    case 2:
                        isReady = DB2105WriteHelper.WriteG2Pd();
                        break;
                    case 3:
                        isReady = DB2105WriteHelper.WriteG3Pd();
                        break;
                    case 4:
                        isReady = DB2105WriteHelper.WriteG4Pd();
                        break;
                    case 5:
                        isReady = DB2105WriteHelper.WriteG5Pd();
                        break;
                    case 6:
                        isReady = DB2105WriteHelper.WriteG6Pd();
                        break;
                    case 7:
                        isReady = DB2105WriteHelper.WriteG7Pd();
                        break;
                    case 8:
                        isReady = DB2105WriteHelper.WriteG8Pd();
                        break;
                    default: 
                        isReady = true;
                        MessageBox.Show("当前未选择产线！");
                        return;
                }

                if (!isReady)
                {
                    MessageBox.Show("信号未准备好！");
                }
                else
                {
                    MessageBox.Show("信号下达成功！");
                }
            }

            if (ControlsEntity.GelManualColdWater == runtime.Sender)
            {
                if (MessageBox.Show("确认下冷水？", "下水确认", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.No)
                {
                    return;
                }
                bool isReady;

                switch (SingleSelect())
                {
                    case 1:
                        isReady = DB2105WriteHelper.WriteG1Cw();
                        break;
                    case 2:
                        isReady = DB2105WriteHelper.WriteG2Cw();
                        break;
                    case 3:
                        isReady = DB2105WriteHelper.WriteG3Cw();
                        break;
                    case 4:
                        isReady = DB2105WriteHelper.WriteG4Cw();
                        break;
                    case 5:
                        isReady = DB2105WriteHelper.WriteG5Cw();
                        break;
                    case 6:
                        isReady = DB2105WriteHelper.WriteG6Cw();
                        break;
                    case 7:
                        isReady = DB2105WriteHelper.WriteG7Cw();
                        break;
                    case 8:
                        isReady = DB2105WriteHelper.WriteG8Cw();
                        break;
                    default:
                        isReady = true;
                        MessageBox.Show("当前未选择产线！");
                        return;
                }

                if (!isReady)
                {
                    MessageBox.Show("信号未准备好！");
                }
                else
                {
                    MessageBox.Show("信号下达成功！");
                }

            }

            if (ControlsEntity.GelManualHotWater == runtime.Sender)
            {
                if (MessageBox.Show("确认下热水？", "下水确认", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.No)
                {
                    return;
                }

                bool isReady;

                switch (SingleSelect())
                {
                    case 1:
                        isReady = DB2105WriteHelper.WriteG1Hw();
                        break;
                    case 2:
                        isReady = DB2105WriteHelper.WriteG2Hw();
                        break;
                    case 3:
                        isReady = DB2105WriteHelper.WriteG3Hw();
                        break;
                    case 4:
                        isReady = DB2105WriteHelper.WriteG4Hw();
                        break;
                    case 5:
                        isReady = DB2105WriteHelper.WriteG5Hw();
                        break;
                    case 6:
                        isReady = DB2105WriteHelper.WriteG6Hw();
                        break;
                    case 7:
                        isReady = DB2105WriteHelper.WriteG7Hw();
                        break;
                    case 8:
                        isReady = DB2105WriteHelper.WriteG8Hw();
                        break;
                    default:
                        isReady = true;
                        MessageBox.Show("当前未选择产线！");
                        return;
                }

                if (!isReady)
                {
                    MessageBox.Show("信号未准备好！");
                }
                else
                {
                    MessageBox.Show("信号下达成功！");
                }
            }

            if (ControlsEntity.WetManualGel == runtime.Sender)
            {
                if (MessageBox.Show("确认下糊化料？", "下糊化料确认", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.No)
                {
                    return;
                }

                bool isReady;

                switch (SingleSelect())
                {
                    case 1:
                        isReady = DB2105WriteHelper.WriteM1();
                        break;
                    case 2:
                        isReady = DB2105WriteHelper.WriteM2();
                        break;
                    case 3:
                        isReady = DB2105WriteHelper.WriteM3();
                        break;
                    case 4:
                        isReady = DB2105WriteHelper.WriteM4();
                        break;
                    case 5:
                        isReady = DB2105WriteHelper.WriteM5();
                        break;
                    case 6:
                        isReady = DB2105WriteHelper.WriteM6();
                        break;
                    case 7:
                        isReady = DB2105WriteHelper.WriteM7();
                        break;
                    case 8:
                        isReady = DB2105WriteHelper.WriteM8();
                        break;
                    default:
                        isReady = false;
                        MessageBox.Show("当前未选择产线！");
                        return;
                }

                if (!isReady)
                {
                    MessageBox.Show("信号未准备好！");
                }
                else
                {
                    MessageBox.Show("信号下达成功！");
                }
            }

            if (ControlsEntity.WetManualControl == runtime.Sender)
            {
                if (MessageBox.Show("确认下传数据？", "下传确认", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.No)
                {
                    return;
                }

                float t = Convert.ToSingle(ControlsEntity.ManualTolerance.MCValue.ToString());

                if (t < 0.1)
                {
                    MessageBox.Show("公差不能小于0.1！");
                    return;
                }

                SetValue value = new SetValue()
                {
                    Value = Convert.ToSingle(ControlsEntity.ManualWeight.MCValue.ToString()),
                    Toterance = t
                };

                switch (SingleSelect())
                {
                    case 1:
                        DB2105WriteHelper.WriteManScrewH1();
                        DB2105WriteHelper.WriteSetValueH1(value);
                        break;
                    case 2:
                        DB2105WriteHelper.WriteManScrewH2();
                        DB2105WriteHelper.WriteSetValueH1(value);
                        break;
                    case 3:
                        DB2105WriteHelper.WriteManScrewH3();
                        DB2105WriteHelper.WriteSetValueH2(value);
                        break;
                    case 4:
                        DB2105WriteHelper.WriteManScrewH4();
                        DB2105WriteHelper.WriteSetValueH2(value);
                        break;
                    
                    case 5:
                        DB2105WriteHelper.WriteManScrewH5();
                        DB2105WriteHelper.WriteSetValueH3(value);
                        break;
                    case 6:
                        DB2105WriteHelper.WriteManScrewH6();
                        DB2105WriteHelper.WriteSetValueH3(value);
                        break;
                    case 7:
                        DB2105WriteHelper.WriteManScrewH7();
                        DB2105WriteHelper.WriteSetValueH4(value);
                        break;
                    case 8:
                        DB2105WriteHelper.WriteManScrewH8();
                        DB2105WriteHelper.WriteSetValueH4(value);
                        break;
                    default:
                        MessageBox.Show("当前未选择产线！");
                        return;
                }

                MessageBox.Show("数据下传成功！");

            }

            #endregion

            #region 自动启停

            if (ControlsEntity.LineStart == runtime.Sender)
            {
                if (MessageBox.Show("确认启动生产？", "启动确认", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.No)
                {
                    return;
                }

                switch (SingleSelect())
                {
                    case 1:
                        DB2105WriteHelper.WriteStartJob1();
                        break;
                    case 2:
                        DB2105WriteHelper.WriteStartJob2();
                        break;
                    case 3:
                        DB2105WriteHelper.WriteStartJob3();
                        break;
                    case 4:
                        DB2105WriteHelper.WriteStartJob4();
                        break;
                    case 5:
                        DB2105WriteHelper.WriteStartJob5();
                        break;
                    case 6:
                        DB2105WriteHelper.WriteStartJob6();
                        break;
                    case 7:
                        DB2105WriteHelper.WriteStartJob7();
                        break;
                    case 8:
                        DB2105WriteHelper.WriteStartJob8();
                        break;
                    default:
                        MessageBox.Show("请选择一条产线！");
                        return;
                }

                MessageBox.Show("产线已启动！");

            }

            if (ControlsEntity.LineStop == runtime.Sender)
            {
                switch (SingleSelect())
                {
                    case 1:
                        DB2105WriteHelper.WriteStopJob1();
                        break;
                    case 2:
                        DB2105WriteHelper.WriteStopJob2();
                        break;
                    case 3:
                        DB2105WriteHelper.WriteStopJob3();
                        break;
                    case 4:
                        DB2105WriteHelper.WriteStopJob4();
                        break;
                    case 5:
                        DB2105WriteHelper.WriteStopJob5();
                        break;
                    case 6:
                        DB2105WriteHelper.WriteStopJob6();
                        break;
                    case 7:
                        DB2105WriteHelper.WriteStopJob7();
                        break;
                    case 8:
                        DB2105WriteHelper.WriteStopJob8();
                        break;
                    default:
                        MessageBox.Show("请选择一条产线！");
                        return;
                }

                MessageBox.Show("已经停止生产");

            }

            #endregion

        }

        #region 帮助类

        /// <summary>
        /// 单选选择
        /// </summary>
        /// <returns>返回单选的产线号 如果未选择返回0</returns>
        private int SingleSelect()
        {
            if (Convert.ToBoolean(ControlsEntity.Line1.MCValue) == true)
            {
                return 1;
            }
            else if (Convert.ToBoolean(ControlsEntity.Line2.MCValue) == true)
            {
                return 2;
            }
            else if (Convert.ToBoolean(ControlsEntity.Line3.MCValue) == true)
            {
                return 3;
            }
            else if (Convert.ToBoolean(ControlsEntity.Line4.MCValue) == true)
            {
                return 4;
            }
            else if (Convert.ToBoolean(ControlsEntity.Line5.MCValue) == true)
            {
                return 5;
            }
            else if (Convert.ToBoolean(ControlsEntity.Line6.MCValue) == true)
            {
                return 6;
            }
            else if (Convert.ToBoolean(ControlsEntity.Line7.MCValue) == true)
            {
                return 7;
            }
            else if (Convert.ToBoolean(ControlsEntity.Line8.MCValue) == true)
            {
                return 8;
            }
            else
            {
                return 0;
            }
        }

        /// <summary>
        /// 控件导入
        /// </summary>
        private void ControlImport()
        {
            ControlsEntity.Line1 = GetMCRadioButtonControl("Line1");
            ControlsEntity.Line2 = GetMCRadioButtonControl("Line2");
            ControlsEntity.Line3 = GetMCRadioButtonControl("Line3");
            ControlsEntity.Line4 = GetMCRadioButtonControl("Line4");
            ControlsEntity.Line5 = GetMCRadioButtonControl("Line5");
            ControlsEntity.Line6 = GetMCRadioButtonControl("Line6");
            ControlsEntity.Line7 = GetMCRadioButtonControl("Line7");
            ControlsEntity.Line8 = GetMCRadioButtonControl("Line8");

            ControlsEntity.ChooseMaterial1 = GetComboBoxControl("ChooseMaterial1");
            ControlsEntity.ChooseMaterial2 = GetComboBoxControl("ChooseMaterial2");

            ControlsEntity.MaterialWeight1 = GetBaseControl("MaterialWeight1");
            ControlsEntity.MaterialWeight2 = GetBaseControl("MaterialWeight2");
            ControlsEntity.MaterialTolerance1 = GetBaseControl("MaterialTolerance1");
            ControlsEntity.MaterialTolerance2 = GetBaseControl("MaterialTolerance2");
            ControlsEntity.GelSpeedSet = GetBaseControl("GelSpeedSet");
            ControlsEntity.GelPosTimeA = GetBaseControl("GelPosTimeA");
            ControlsEntity.GelNagTimeB = GetBaseControl("GelNagTimeB");
            ControlsEntity.GelPosTimeC = GetBaseControl("GelPosTimeC");
            ControlsEntity.GelWaterTime = GetBaseControl("GelWaterTime");
            ControlsEntity.GelWaitTime = GetBaseControl("GelWaitTime");
            ControlsEntity.GelCloseHeatTime = GetBaseControl("GelCloseHeatTime");
            ControlsEntity.GelOutDelayTime = GetBaseControl("GelOutDelayTime");

            ControlsEntity.WetDryWeight = GetBaseControl("WetDryWeight");
            ControlsEntity.WetMixTime = GetBaseControl("WetMixTime");
            ControlsEntity.WetOutDelayTime = GetBaseControl("WetOutDelayTime");
            ControlsEntity.ManualTolerance = GetBaseControl("ManualTolerance");
            ControlsEntity.ManualWeight = GetBaseControl("ManualWeight");

            ControlsEntity.WetManualControl = GetButtonControl("WetManualControl");
            ControlsEntity.Download = GetButtonControl("Download");
            ControlsEntity.LineStart = GetButtonControl("LineStart");
            ControlsEntity.LineStop = GetButtonControl("LineStop");
            ControlsEntity.GelManualPowder = GetButtonControl("GelManualPowder");
            ControlsEntity.GelManualColdWater = GetButtonControl("GelManualColdWater");
            ControlsEntity.GelManualHotWater = GetButtonControl("GelManualHotWater");
            ControlsEntity.WetManualGel = GetButtonControl("WetManualGel");
        }

        private IBaseControl GetBaseControl(string name)
        {
            return McControls.First(x => x.Name == name) as IBaseControl;
        }

        private Button GetButtonControl(string name)
        {
            return McControls.First(x => x.Name == name) as Button;
        }

        private MCCombobox GetComboBoxControl(string name)
        {
            return McControls.First(x => x.Name == name) as MCCombobox;
        }

        private MCRadioButton GetMCRadioButtonControl(string name)
        {
            return McControls.First(x => x.Name == name) as MCRadioButton;
        }

        #endregion

    }

}