lj_plc/Actions/ChemicalWeighing/Mesnac.Action.ChemicalWeighing/AutoControl/PlcAutoWriteHelper.cs

using DataBlockHelper.DBHelpers;
using DataBlockHelper.Entity.DB2104Entity;
using Mesnac.Action.ChemicalWeighing.AutoControl.DB;
using Mesnac.Action.ChemicalWeighing.AutoControl.Entity;
using Mesnac.Action.ChemicalWeighing.LjMixManager;
using Mesnac.Action.ChemicalWeighing.LjPlanning;
using Mesnac.Action.ChemicalWeighing.MinAn;
using Mesnac.Controls.Default;
using Mesnac.Core.Service;
using System;
using System.Collections.Generic;
using System.Windows.Forms;
using static Mesnac.Action.ChemicalWeighing.AutoControl.AutoLogHelper;

namespace Mesnac.Action.ChemicalWeighing.AutoControl
{
    public static class PlcAutoWriteHelper
    {
        /// <summary>
        /// 干混公差控制
        /// </summary>
        private static int TFlag = 0;

        #region 湿混糊化下传

        public static void GelWetDownload(MCTextBoxEntity TextE, MCComboBoxEntity ComboE, MCRadioButtonEntity RadioE)
        {

            int b1 = Convert.ToInt32(ComboE.ChooseMaterial1.MCValue.ToString());
            int b2 = Convert.ToInt32(ComboE.ChooseMaterial2.MCValue.ToString());

            short bin1 = (short)StockMaterrialDbHelp.GetCodeById(b1);
            short bin2 = (short)StockMaterrialDbHelp.GetCodeById(b2);

            float MatTol1 = Convert.ToSingle(TextE.MaterialTolerance1.MCValue.ToString());
            float MatTol2 = Convert.ToSingle(TextE.MaterialTolerance2.MCValue.ToString());

            float MatWei1 = Convert.ToSingle(TextE.MaterialWeight1.MCValue.ToString());
            float MatWei2 = Convert.ToSingle(TextE.MaterialWeight2.MCValue.ToString());

            float GelSpeed = Convert.ToSingle(TextE.GelSpeedSet.MCValue.ToString());

            float GelPosA = Convert.ToSingle(TextE.GelPosTimeA.MCValue.ToString());
            float GelNagB = Convert.ToSingle(TextE.GelNagTimeB.MCValue.ToString());
            short GelPosC = Convert.ToInt16(TextE.GelPosTimeC.MCValue.ToString());

            short GelWater = Convert.ToInt16(TextE.GelWaterTime.MCValue.ToString());
            short GelWait = Convert.ToInt16(TextE.GelWaitTime.MCValue.ToString());
            short GelCloseHeat = Convert.ToInt16(TextE.GelCloseHeatTime.MCValue.ToString());
            float GelDelayTime = Convert.ToSingle(TextE.GelOutDelayTime.MCValue.ToString());

            if (b2 == -1)
            {
                if (MatTol1 < 0.1)
                {
                    MessageBox.Show("公差不能小于0.1！");
                    return;
                }
            }
            else
            {
                if (MatTol1 < 0.1 || MatTol2 < 0.1)
                {
                    MessageBox.Show("公差不能小于0.1！");
                    return;
                }
            }

            if(GelSpeed > 50)
            {
                MessageBox.Show("速度不能大于五十！");
                return;
            }

            List<RecipePlcView> recipes = new List<RecipePlcView>();

            RecipePlcView recipe1 = new RecipePlcView()
            {
                Bin = bin1,
                Set = MatWei1,
                Tolerance = MatTol1,
            };
            RecipePlcView recipe2 = new RecipePlcView()
            {
                Bin = bin2,
                Set = MatWei2,
                Tolerance = MatTol2,
            };

            recipes.Add(recipe1);
            recipes.Add(recipe2);

            List<Step> steps = new List<Step>();

            Step step1 = new Step()
            {
                MixCode = 1,
                MixSpeed = GelSpeed
            };
            Step step2 = new Step()
            {
                MixCode = 2,
            };
            Step step3 = new Step()
            {
                MixCode = 3,
                MixTime = GelPosC,
                MixTemp = GelPosA,
                MixSpeed = GelNagB
            };
            Step step4 = new Step()
            {
                MixCode = 4,
            };
            Step step5 = new Step()
            {
                MixCode = 5,
                MixTime = GelWater
            };
            Step step6 = new Step()
            {
                MixCode = 6,
            };
            Step step7 = new Step()
            {
                MixCode = 5,
                MixTime = GelWait
            };
            Step step8 = new Step()
            {
                MixCode = 7,
                MixTime = GelCloseHeat,
                MixTemp = GelDelayTime
            };
            Step step9 = new Step();

            steps.Add(step1);
            steps.Add(step2);
            steps.Add(step3);
            steps.Add(step4);
            steps.Add(step5);
            steps.Add(step6);
            steps.Add(step7);
            steps.Add(step8);
            steps.Add(step9);
            steps.Add(step9);

            float WetDryWei = Convert.ToSingle(TextE.WetDryWeight.MCValue.ToString());
            short WetMix = Convert.ToInt16(TextE.WetMixTime.MCValue.ToString());
            short WetOutDelay = Convert.ToInt16(TextE.WetOutDelayTime.MCValue.ToString());

            List<MixStep> mixSteps = new List<MixStep>();

            MixStep mixStep1 = new MixStep()
            {
                MixCode = 1,
            };
            MixStep mixStep2 = new MixStep()
            {
                MixCode = 2,
                SetValue = WetDryWei
            };
            MixStep mixStep3 = new MixStep()
            {
                MixCode = 3,
                MixTime = WetMix
            };
            MixStep mixStep4 = new MixStep()
            {
                MixCode = 4,
            };
            MixStep mixStep5 = new MixStep()
            {
                MixCode = 5,
                MixTime = WetOutDelay
            };
            MixStep mixStep6 = new MixStep();


            mixSteps.Add(mixStep1);
            mixSteps.Add(mixStep2);
            mixSteps.Add(mixStep3);
            mixSteps.Add(mixStep4);
            mixSteps.Add(mixStep5);
            mixSteps.Add(mixStep6);
            mixSteps.Add(mixStep6);
            mixSteps.Add(mixStep6);
            mixSteps.Add(mixStep6);
            mixSteps.Add(mixStep6);

            List<DeviceMaterrial> materials = new List<DeviceMaterrial>();

            DeviceMaterrial deviceMaterial1 = new DeviceMaterrial()
            {
                DeviceId = ControlsHelper.SingleSelect(RadioE),
                MaterrialId = b1,
                Type = 2,
                Code = StockMaterrialDbHelp.GetCodeById(b1)
            };

            DeviceMaterrial deviceMaterial2 = new DeviceMaterrial()
            {
                DeviceId = ControlsHelper.SingleSelect(RadioE),
                MaterrialId = b2,
                Type = 2,
                Code = StockMaterrialDbHelp.GetCodeById(b2)
            };

            materials.Add(deviceMaterial1);
            materials.Add(deviceMaterial2);

            switch (ControlsHelper.SingleSelect(RadioE))
            {
                case 1:
                    LjPlanningPlcHelp.DownG1Recipe(recipes, steps);
                    LjPlanningPlcHelp.DownM1Recipe(mixSteps);
                    DeviceMaterrialService.Save(materials);
                    break;
                case 2:
                    LjPlanningPlcHelp.DownG2Recipe(recipes, steps);
                    LjPlanningPlcHelp.DownM2Recipe(mixSteps);
                    DeviceMaterrialService.Save(materials);
                    break;
                case 3:
                    LjPlanningPlcHelp.DownG3Recipe(recipes, steps);
                    LjPlanningPlcHelp.DownM3Recipe(mixSteps);
                    DeviceMaterrialService.Save(materials);
                    break;
                case 4:
                    LjPlanningPlcHelp.DownG4Recipe(recipes, steps);
                    LjPlanningPlcHelp.DownM4Recipe(mixSteps);
                    DeviceMaterrialService.Save(materials);
                    break;
                case 5:
                    LjPlanningPlcHelp.DownG5Recipe(recipes, steps);
                    LjPlanningPlcHelp.DownM5Recipe(mixSteps);
                    DeviceMaterrialService.Save(materials);
                    break;
                case 6:
                    LjPlanningPlcHelp.DownG6Recipe(recipes, steps);
                    LjPlanningPlcHelp.DownM6Recipe(mixSteps);
                    DeviceMaterrialService.Save(materials);
                    break;
                case 7:
                    LjPlanningPlcHelp.DownG7Recipe(recipes, steps);
                    LjPlanningPlcHelp.DownM7Recipe(mixSteps);
                    DeviceMaterrialService.Save(materials);
                    break;
                case 8:
                    LjPlanningPlcHelp.DownG8Recipe(recipes, steps);
                    LjPlanningPlcHelp.DownM8Recipe(mixSteps);
                    DeviceMaterrialService.Save(materials);
                    break;
                default:
                    MessageBox.Show("请选择一条产线！");
                    return;
            }

            GWlog(recipes, steps, mixSteps, RadioE);

            //if (!GWComparePLC(recipes, steps, mixSteps, RadioE))
            //{
            //    MessageBox.Show("湿混糊化产线下传数据不完整，请重新下传数据！");
            //}

            MessageBox.Show("数据下传成功！");
        }

        private static bool GWComparePLC(List<RecipePlcView> recipes, List<Step> steps, List<MixStep> mixSteps, MCRadioButtonEntity RadioE)
        {
            var getGelatG1 = LjPlanningPlcHelp.GetGelatG1;
            var getWeterM1 = LjPlanningPlcHelp.GetWeterM1;
            var getGelatG2 = LjPlanningPlcHelp.GetGelatG2;
            var getWeterM2 = LjPlanningPlcHelp.GetWeterM2;
            var getGelatG3 = LjPlanningPlcHelp.GetGelatG3;
            var getWeterM3 = LjPlanningPlcHelp.GetWeterM3;
            var getGelatG4 = LjPlanningPlcHelp.GetGelatG4;
            var getWeterM4 = LjPlanningPlcHelp.GetWeterM4;
            var getGelatG5 = LjPlanningPlcHelp.GetGelatG5;
            var getWeterM5 = LjPlanningPlcHelp.GetWeterM5;
            var getGelatG6 = LjPlanningPlcHelp.GetGelatG6;
            var getWeterM6 = LjPlanningPlcHelp.GetWeterM6;
            var getGelatG7 = LjPlanningPlcHelp.GetGelatG7;
            var getWeterM7 = LjPlanningPlcHelp.GetWeterM7;
            var getGelatG8 = LjPlanningPlcHelp.GetGelatG8;
            var getWeterM8 = LjPlanningPlcHelp.GetWeterM8;

            string j1 = ControlsHelper.JsonSerialize(recipes);
            string j2 = ControlsHelper.JsonSerialize(steps);
            string j3 = ControlsHelper.JsonSerialize(mixSteps);

            switch (ControlsHelper.SingleSelect(RadioE))
            {
                case 1:
                    return j1 == ControlsHelper.JsonSerialize(getGelatG1.RecipePlcViews)
                        && j2 == ControlsHelper.JsonSerialize(getGelatG1.RecipeSteps)
                        && j3 == ControlsHelper.JsonSerialize(getWeterM1);
                case 2:
                    return j1 == ControlsHelper.JsonSerialize(getGelatG2.RecipePlcViews)
                        && j2 == ControlsHelper.JsonSerialize(getGelatG2.RecipeSteps)
                        && j3 == ControlsHelper.JsonSerialize(getWeterM2);
                case 3:
                    return j1 == ControlsHelper.JsonSerialize(getGelatG3.RecipePlcViews)
                        && j2 == ControlsHelper.JsonSerialize(getGelatG3.RecipeSteps)
                        && j3 == ControlsHelper.JsonSerialize(getWeterM3);
                case 4:
                    return j1 == ControlsHelper.JsonSerialize(getGelatG4.RecipePlcViews)
                        && j2 == ControlsHelper.JsonSerialize(getGelatG4.RecipeSteps)
                        && j3 == ControlsHelper.JsonSerialize(getWeterM4);
                case 5:
                    return j1 == ControlsHelper.JsonSerialize(getGelatG5.RecipePlcViews)
                        && j2 == ControlsHelper.JsonSerialize(getGelatG5.RecipeSteps)
                        && j3 == ControlsHelper.JsonSerialize(getWeterM5);
                case 6:
                    return j1 == ControlsHelper.JsonSerialize(getGelatG6.RecipePlcViews)
                        && j2 == ControlsHelper.JsonSerialize(getGelatG6.RecipeSteps)
                        && j3 == ControlsHelper.JsonSerialize(getWeterM6);
                case 7:
                    return j1 == ControlsHelper.JsonSerialize(getGelatG7.RecipePlcViews)
                        && j2 == ControlsHelper.JsonSerialize(getGelatG7.RecipeSteps)
                        && j3 == ControlsHelper.JsonSerialize(getWeterM7);
                case 8:
                    return j1 == ControlsHelper.JsonSerialize(getGelatG8.RecipePlcViews)
                        && j2 == ControlsHelper.JsonSerialize(getGelatG8.RecipeSteps)
                        && j3 == ControlsHelper.JsonSerialize(getWeterM8);
                default:
                    MessageBox.Show("未选择产线！");
                    return true;
            }

        }

        #endregion

        #region 干混下传

        public static void DryDownload(MCTextBoxEntity TextE, MCComboBoxEntity ComboE, MCRadioButtonEntity RadioE)
        {
            List<RecipePlcView> recipes = new List<RecipePlcView>();

            List<Step> steps = new List<Step>();

            List<DeviceMaterrial> materials = new List<DeviceMaterrial>();

            DryerGetValue(ComboE.DryM1, TextE.DryW1, TextE.DryT1, recipes, materials, RadioE);
            DryerGetValue(ComboE.DryM2, TextE.DryW2, TextE.DryT2, recipes, materials, RadioE);
            DryerGetValue(ComboE.DryM3, TextE.DryW3, TextE.DryT3, recipes, materials, RadioE);
            DryerGetValue(ComboE.DryM4, TextE.DryW4, TextE.DryT4, recipes, materials, RadioE);
            DryerGetValue(ComboE.DryM5, TextE.DryW5, TextE.DryT5, recipes, materials, RadioE);
            DryerGetValue(ComboE.DryM6, TextE.DryW6, TextE.DryT6, recipes, materials, RadioE);
            DryerGetValue(ComboE.DryM7, TextE.DryW7, TextE.DryT7, recipes, materials, RadioE);
            DryerGetValue(ComboE.DryM8, TextE.DryW8, TextE.DryT8, recipes, materials, RadioE);
            DryerGetValue(ComboE.DryM9, TextE.DryW9, TextE.DryT9, recipes, materials, RadioE);
            DryerGetValue(ComboE.DryM10, TextE.DryW10, TextE.DryT10, recipes, materials, RadioE);
            DryerGetValue(ComboE.DryM11, TextE.DryW11, TextE.DryT11, recipes, materials, RadioE);
            DryerGetValue(ComboE.DryM12, TextE.DryW12, TextE.DryT12, recipes, materials, RadioE);

            if (TFlag == 1)
            {
                MessageBox.Show("公差不能小于0.1！");
                TFlag = 0;
                return;
            }

            short dryWaitTime = Convert.ToInt16(TextE.DryWaitTime.MCValue.ToString());
            short dryOutDelayTime = Convert.ToInt16(TextE.DryOutDelayTime.MCValue.ToString());
            float drySpeed1 = Convert.ToSingle(TextE.DrySpeed1.MCValue.ToString());
            float drySpeed2 = Convert.ToSingle(TextE.DrySpeed2.MCValue.ToString());
            float drySpeed3 = Convert.ToSingle(TextE.DrySpeed3.MCValue.ToString());

            if (drySpeed1 > 50 || drySpeed2 > 50 || drySpeed3 > 50)
            {
                MessageBox.Show("速度值不能大于五十！");
                return;
            }

            Step dryStep1 = new Step()
            {
                MixCode = 1,
                MixSpeed = drySpeed1,
            };
            Step dryStep2 = new Step()
            {
                MixCode = 4,
                MixTime = dryWaitTime,
                MixSpeed = drySpeed2,
            };
            Step dryStep3 = new Step()
            {
                MixCode = 6,
                MixTime = dryOutDelayTime,
                MixSpeed = drySpeed3,
            };
            Step dryStep = new Step();

            steps.Add(dryStep1);
            steps.Add(dryStep2);
            steps.Add(dryStep3);
            steps.Add(dryStep);
            steps.Add(dryStep);
            steps.Add(dryStep);
            steps.Add(dryStep);
            steps.Add(dryStep);
            steps.Add(dryStep);
            steps.Add(dryStep);

            switch (ControlsHelper.DrySelect(RadioE))
            {
                case 1:
                    LjPlanningPlcHelp.DownD1Recipe(recipes, steps);
                    DeviceMaterrialService.Save(materials);
                    break;
                case 2:
                    LjPlanningPlcHelp.DownD2Recipe(recipes, steps);
                    DeviceMaterrialService.Save(materials);
                    break;
                case 3:
                    LjPlanningPlcHelp.DownD3Recipe(recipes, steps);
                    DeviceMaterrialService.Save(materials);
                    break;
                case 4:
                    LjPlanningPlcHelp.DownD4Recipe(recipes, steps);
                    DeviceMaterrialService.Save(materials);
                    break;
            }

            //if (!DYComparePLC(recipes, steps, RadioE))
            //{
            //    MessageBox.Show("干混产线下传数据不完整，请重新下传数据！");
            //}

            MessageBox.Show("数据下传成功！");

        }

        private static bool DYComparePLC(List<RecipePlcView> recipes, List<Step> steps, MCRadioButtonEntity RadioE)
        {
            var getDryerD1 = LjPlanningPlcHelp.GetDryerD1;
            var getDryerD2 = LjPlanningPlcHelp.GetDryerD2;
            var getDryerD3 = LjPlanningPlcHelp.GetDryerD3;
            var getDryerD4 = LjPlanningPlcHelp.GetDryerD4;

            string j1 = ControlsHelper.JsonSerialize(recipes);
            string j2 = ControlsHelper.JsonSerialize(steps);

            switch (ControlsHelper.DrySelect(RadioE))
            {
                case 1:
                    return j1 == ControlsHelper.JsonSerialize(getDryerD1.RecipePlcViews)
                        && j2 == ControlsHelper.JsonSerialize(getDryerD1.RecipeSteps);
                case 2:
                    return j1 == ControlsHelper.JsonSerialize(getDryerD2.RecipePlcViews)
                        && j2 == ControlsHelper.JsonSerialize(getDryerD2.RecipeSteps);
                case 3:
                    return j1 == ControlsHelper.JsonSerialize(getDryerD3.RecipePlcViews)
                        && j2 == ControlsHelper.JsonSerialize(getDryerD3.RecipeSteps);
                case 4:
                    return j1 == ControlsHelper.JsonSerialize(getDryerD4.RecipePlcViews)
                        && j2 == ControlsHelper.JsonSerialize(getDryerD4.RecipeSteps);
                default:
                    MessageBox.Show("未选择产线！");
                    return true;
            }
        }

        #endregion

        #region 水称下传

        public static void WaterDownload(MCTextBoxEntity TextE, MCComboBoxEntity ComboE)
        {
            WaterEntity HotA = new WaterEntity();
            WaterEntity ColdA = new WaterEntity();
            WaterEntity HotB = new WaterEntity();
            WaterEntity ColdB = new WaterEntity();

            float hotASet, hotBSet, coldASet, coldBSet, hotATol, hotBTol, coldATol, coldBTol;

            float cADeviation; ushort cALeftOrRight;
            float hADeviation; ushort hALeftOrRight;
            float cBDeviation; ushort cBLeftOrRight;
            float hBDeviation; ushort hBLeftOrRight;

            if (float.TryParse(Convert.ToString(TextE.HotValueA.MCValue), out hotASet) &&
                float.TryParse(Convert.ToString(TextE.HotToleranceA.MCValue), out hotATol) &&
                float.TryParse(Convert.ToString(TextE.HotValueB.MCValue), out hotBSet) &&
                float.TryParse(Convert.ToString(TextE.HotToleranceB.MCValue), out hotBTol) &&
                float.TryParse(Convert.ToString(TextE.ColdValueA.MCValue), out coldASet) &&
                float.TryParse(Convert.ToString(TextE.ColdToleranceA.MCValue), out coldATol) &&
                float.TryParse(Convert.ToString(TextE.ColdValueB.MCValue), out coldBSet) &&
                float.TryParse(Convert.ToString(TextE.ColdToleranceB.MCValue), out coldBTol)


                && float.TryParse(Convert.ToString(TextE.CADeviation.MCValue), out cADeviation)
                 && float.TryParse(Convert.ToString(TextE.HADeviation.MCValue), out hADeviation)
                  && float.TryParse(Convert.ToString(TextE.CBDeviation.MCValue), out cBDeviation)
                   && float.TryParse(Convert.ToString(TextE.HBDeviation.MCValue), out hBDeviation)


                )
            {
                HotA.Set = hotASet;
                HotB.Set = hotBSet;
                ColdA.Set = coldASet;
                ColdB.Set = coldBSet;

                HotA.Tolerance = hotATol;
                HotB.Tolerance = hotBTol;
                ColdA.Tolerance = coldATol;
                ColdB.Tolerance = coldBTol;


                HotA.differ = hADeviation; 
                HotB.differ = hBDeviation;
                ColdA.differ = cADeviation;
                ColdB.differ= cBDeviation;

                HotA.stand = Convert.ToInt16(ComboE.HALeftOrRight.MCValue);
                HotB.stand = Convert.ToInt16(ComboE.HBLeftOrRight.MCValue);

                ColdA.stand = Convert.ToInt16(ComboE.CALeftOrRight.MCValue);
                ColdB.stand = Convert.ToInt16(ComboE.CBLeftOrRight.MCValue);

                Db2104WriteHelper.WriteAHostWater(HotA);
                Db2104WriteHelper.WriteBHostWater(HotB);
                Db2104WriteHelper.WriteAColWater(ColdA);
                Db2104WriteHelper.WriteBColWater(ColdB);
                MesnacServiceManager.Instance.LoggingService.Info("水称数据下发成功！");
                MessageBox.Show("水称数据下发成功");
            }
            else
            {
                MesnacServiceManager.Instance.LoggingService.Info("输入数值的格式有误");
                MessageBox.Show("输入数值的格式有误！");
                return;
            }
        }

        #endregion

        #region 手动控制

        #region 糊化锅手动下粉料

        public static bool GelPowderDownload(MCRadioButtonEntity RadioE)
        {
            bool isReady;

            switch (ControlsHelper.SingleSelect(RadioE))
            {
                case 1:
                    isReady = DB2105WriteHelper.WriteG1Pd();
                    break;
                case 2:
                    isReady = DB2105WriteHelper.WriteG2Pd();
                    break;
                case 3:
                    isReady = DB2105WriteHelper.WriteG3Pd();
                    break;
                case 4:
                    isReady = DB2105WriteHelper.WriteG4Pd();
                    break;
                case 5:
                    isReady = DB2105WriteHelper.WriteG5Pd();
                    break;
                case 6:
                    isReady = DB2105WriteHelper.WriteG6Pd();
                    break;
                case 7:
                    isReady = DB2105WriteHelper.WriteG7Pd();
                    break;
                case 8:
                    isReady = DB2105WriteHelper.WriteG8Pd();
                    break;
                default:
                    isReady = false;
                    MessageBox.Show("当前未选择产线！");
                    break;
            }

            return isReady;
        }

        #endregion

        #region 糊化锅手动加冷水

        public static bool GelColdWaterDownload(MCRadioButtonEntity RadioE)
        {
            bool isReady;

            switch (ControlsHelper.SingleSelect(RadioE))
            {
                case 1:
                    isReady = DB2105WriteHelper.WriteG1Cw();
                    break;
                case 2:
                    isReady = DB2105WriteHelper.WriteG2Cw();
                    break;
                case 3:
                    isReady = DB2105WriteHelper.WriteG3Cw();
                    break;
                case 4:
                    isReady = DB2105WriteHelper.WriteG4Cw();
                    break;
                case 5:
                    isReady = DB2105WriteHelper.WriteG5Cw();
                    break;
                case 6:
                    isReady = DB2105WriteHelper.WriteG6Cw();
                    break;
                case 7:
                    isReady = DB2105WriteHelper.WriteG7Cw();
                    break;
                case 8:
                    isReady = DB2105WriteHelper.WriteG8Cw();
                    break;
                default:
                    isReady = false;
                    MessageBox.Show("当前未选择产线！");
                    break;
            }

            return isReady;
        }

        #endregion

        #region 糊化锅手动加热水

        public static bool GelHotWaterDownload(MCRadioButtonEntity RadioE)
        {
            bool isReady;

            switch (ControlsHelper.SingleSelect(RadioE))
            {
                case 1:
                    isReady = DB2105WriteHelper.WriteG1Hw();
                    break;
                case 2:
                    isReady = DB2105WriteHelper.WriteG2Hw();
                    break;
                case 3:
                    isReady = DB2105WriteHelper.WriteG3Hw();
                    break;
                case 4:
                    isReady = DB2105WriteHelper.WriteG4Hw();
                    break;
                case 5:
                    isReady = DB2105WriteHelper.WriteG5Hw();
                    break;
                case 6:
                    isReady = DB2105WriteHelper.WriteG6Hw();
                    break;
                case 7:
                    isReady = DB2105WriteHelper.WriteG7Hw();
                    break;
                case 8:
                    isReady = DB2105WriteHelper.WriteG8Hw();
                    break;
                default:
                    isReady = false;
                    MessageBox.Show("当前未选择产线！");
                    break;
            }

            return isReady;
        }

        #endregion

        #region 湿混机手动下糊化料

        public static bool WetGelatDownload(MCRadioButtonEntity RadioE)
        {
            bool isReady;

            switch (ControlsHelper.SingleSelect(RadioE))
            {
                case 1:
                    isReady = DB2105WriteHelper.WriteM1();
                    break;
                case 2:
                    isReady = DB2105WriteHelper.WriteM2();
                    break;
                case 3:
                    isReady = DB2105WriteHelper.WriteM3();
                    break;
                case 4:
                    isReady = DB2105WriteHelper.WriteM4();
                    break;
                case 5:
                    isReady = DB2105WriteHelper.WriteM5();
                    break;
                case 6:
                    isReady = DB2105WriteHelper.WriteM6();
                    break;
                case 7:
                    isReady = DB2105WriteHelper.WriteM7();
                    break;
                case 8:
                    isReady = DB2105WriteHelper.WriteM8();
                    break;
                default:
                    isReady = false;
                    MessageBox.Show("当前未选择产线！");
                    break;
            }

            return isReady;
        }

        #endregion

        #region 湿混机手动下粉料

        public static void WetGelatDownload(MCTextBoxEntity TextE, MCRadioButtonEntity RadioE)
        {
            float t = Convert.ToSingle(TextE.ManualTolerance.MCValue.ToString());
            float w = Convert.ToSingle(TextE.ManualWeight.MCValue.ToString());

            if (t < 0.1)
            {
                MessageBox.Show("公差不能小于0.1！");
                return;
            }

            SetValue value = new SetValue()
            {
                Value = w,
                Toterance = t
            };

            DB2105Helper dB2105= new DB2105Helper();

            var singE = ControlsHelper.SingleSelect(RadioE);
            switch (singE)
            {
                case 1:
                case 2:
                    var h1 = dB2105.H1;
                    if (h1.RunStatus)
                    {
                        ShowError();
                        return;
                    }
                    break;

                case 3:
                case 4:
                    var h2 = dB2105.H2;
                    if (h2.RunStatus)
                    {
                        ShowError();
                        return;
                    }
                    break;

                case 5:
                case 6:
                    var h3 = dB2105.H3;
                    if (h3.RunStatus)
                    {
                        ShowError();
                        return;
                    }
                    break;


                case 7:
                case 8:
                    var h4 = dB2105.H4;
                    if (h4.RunStatus)
                    {
                        ShowError();
                        return;
                    }
                    break;

            }


            switch (singE)
            {
                case 1:
                  
                    PowderDownSignel(MinAnPlc.Heir1, 1);
                    DB2105WriteHelper.WriteSetValueH1(value);
                    DB2105WriteHelper.WriteH(1, "L", true);
                  //  DB2105WriteHelper.WriteManScrewH1();

                    break;
                case 2:
                    PowderDownSignel(MinAnPlc.Heir1, 1);
                    DB2105WriteHelper.WriteSetValueH1(value);
                    DB2105WriteHelper.WriteH(1, "R", true);
                    // DB2105WriteHelper.WriteManScrewH2();

                    break;
                case 3:
                    PowderDownSignel(MinAnPlc.Heir2, 2);
                    DB2105WriteHelper.WriteSetValueH2(value);
                    DB2105WriteHelper.WriteH(2, "L", true);
                    // DB2105WriteHelper.WriteManScrewH3();

                    break;
                case 4:
                    PowderDownSignel(MinAnPlc.Heir2, 2);
                    DB2105WriteHelper.WriteSetValueH2(value);
                    DB2105WriteHelper.WriteH(2, "R", true);
                    //  DB2105WriteHelper.WriteManScrewH4();

                    break;
                case 5:
                    PowderDownSignel(MinAnPlc.Heir3, 3);
                    DB2105WriteHelper.WriteSetValueH3(value);
                    DB2105WriteHelper.WriteH(3, "L", true);
                    //DB2105WriteHelper.WriteManScrewH5();

                    break;
                case 6:
                    PowderDownSignel(MinAnPlc.Heir3, 3);
                    DB2105WriteHelper.WriteSetValueH3(value);

                    DB2105WriteHelper.WriteH(3, "R", true);
                    // DB2105WriteHelper.WriteManScrewH6();
                    break;
                case 7:
                    PowderDownSignel(MinAnPlc.Heir4, 4);
                    DB2105WriteHelper.WriteSetValueH4(value);
                    DB2105WriteHelper.WriteH(4, "L", true);
                    // DB2105WriteHelper.WriteManScrewH7();

                    break;
                case 8:
                    PowderDownSignel(MinAnPlc.Heir4, 4);
                    DB2105WriteHelper.WriteSetValueH4(value);
                    DB2105WriteHelper.WriteH(4,"R", true);
                    //DB2105WriteHelper.WriteManScrewH8();

                    break;
                default:
                    MessageBox.Show("当前未选择产线！");
                    return;
            }

            ManualWeightLog(w, t, RadioE);

        }


        private static void ShowError()
        {
            string message = "称量未结束 请稍后";
            MessageBox.Show(message);
        }

        #endregion



        public static void WetGelatStopDownload(MCRadioButtonEntity RadioE)
        {
            var singE = ControlsHelper.SingleSelect(RadioE);
            int no = (singE + 1) / 2;
            DB2105WriteHelper.WriteH(no, "S", true);
           
        }


        #endregion

        #region 产线启停

        #region 产线启动

        public static void LineStart(MCRadioButtonEntity RadioE)
        {
            switch (ControlsHelper.SingleSelect(RadioE))
            {
                case 1:
                    DB2105WriteHelper.WriteStartJob1();
                    break;
                case 2:
                    DB2105WriteHelper.WriteStartJob2();
                    break;
                case 3:
                    DB2105WriteHelper.WriteStartJob3();
                    break;
                case 4:
                    DB2105WriteHelper.WriteStartJob4();
                    break;
                case 5:
                    DB2105WriteHelper.WriteStartJob5();
                    break;
                case 6:
                    DB2105WriteHelper.WriteStartJob6();
                    break;
                case 7:
                    DB2105WriteHelper.WriteStartJob7();
                    break;
                case 8:
                    DB2105WriteHelper.WriteStartJob8();
                    break;
                default:
                    MessageBox.Show("请选择一条产线！");
                    return;
            }

            SingleLog("产线启动", RadioE);
        }

        #endregion

        #region 产线停止

        public static void LineStop(MCRadioButtonEntity RadioE)
        {
            switch (ControlsHelper.SingleSelect(RadioE))
            {
                case 1:
                    DB2105WriteHelper.WriteStopJob1();
                    break;
                case 2:
                    DB2105WriteHelper.WriteStopJob2();
                    break;
                case 3:
                    DB2105WriteHelper.WriteStopJob3();
                    break;
                case 4:
                    DB2105WriteHelper.WriteStopJob4();
                    break;
                case 5:
                    DB2105WriteHelper.WriteStopJob5();
                    break;
                case 6:
                    DB2105WriteHelper.WriteStopJob6();
                    break;
                case 7:
                    DB2105WriteHelper.WriteStopJob7();
                    break;
                case 8:
                    DB2105WriteHelper.WriteStopJob8();
                    break;
                default:
                    MessageBox.Show("请选择一条产线！");
                    return;
            }

            SingleLog("产线停止", RadioE);
        }

        #endregion

        #endregion

        #region 维修模式

        public static void RepairOnOff(MCLabelEntity LabelE, MCRadioButtonEntity RadioE)
        {
            if (LabelE.RepairState.MCValue.ToString() == "关")
            {

                if (MessageBox.Show("是否开启维修模式？", "维修模式确认", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.No)
                {
                    return;
                }
                Db3000Helper.WriteModel(ControlsHelper.SingleSelect(RadioE), true);
                LabelE.RepairState.MCValue = "开";

                SingleLog("维修模式开启", RadioE);

                MessageBox.Show("维修模式已开启");

            }
            else
            {
                if (LabelE.RepairState.MCValue.ToString() == "开")
                {
                    if (MessageBox.Show("是否关闭维修模式？", "维修模式确认", MessageBoxButtons.YesNo, MessageBoxIcon.Question) == DialogResult.No)
                    {
                        return;
                    }
                    Db3000Helper.WriteModel(ControlsHelper.SingleSelect(RadioE), false);
                    LabelE.RepairState.MCValue = "关";

                    SingleLog("维修模式关闭", RadioE);

                    MessageBox.Show("维修模式已关闭");

                }
            }
        }

        #endregion

        #region 湿混机物料封装

        /// <summary>
        /// 干混机数据打包封装
        /// </summary>
        /// <param name="DryM">物料类型</param>
        /// <param name="DryW">重量</param>
        /// <param name="DryT">公差</param>
        /// <param name="recipes">物料集合</param>
        /// <param name="steps">步骤集合</param>
        /// <param name="materials">数据库物料记录</param>
        private static void DryerGetValue(MCCombobox DryM, MCTextBox DryW, MCTextBox DryT,
            List<RecipePlcView> recipes, List<DeviceMaterrial> materials, MCRadioButtonEntity RadioE)
        {
            int b = Convert.ToInt32(DryM.MCValue.ToString());
            short bin = (short)StockMaterrialDbHelp.GetCodeById(b);
            float w = Convert.ToSingle(DryW.MCValue.ToString());
            float t = Convert.ToSingle(DryT.MCValue.ToString());

            if (b != -1 && t < 0.1)
            {
                TFlag = 1;
            }

            RecipePlcView recipe1 = new RecipePlcView()
            {
                Bin = bin,
                Set = w,
                Tolerance = t,
            };

            recipes.Add(recipe1);

            DeviceMaterrial deviceMaterial1 = new DeviceMaterrial()
            {
                MaterrialId = b,
                Type = 1,
                Code = StockMaterrialDbHelp.GetCodeById(b)
            };

            materials.Add(deviceMaterial1);

        }

        #endregion

        #region 上料提示封装

        private static void PowderDownSignel(bool minanResult, int num)
        {
            if (minanResult)
            {
                DialogResult result = MessageBox.Show(num + "号罐正在上料", "温馨提示：", MessageBoxButtons.OK, MessageBoxIcon.Information);
                if (result == DialogResult.OK)
                {
                    return;
                }
            }
        }

        #endregion
    }
}