添加项目文件。

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

.gitignore

@@ -0,0 +1,363 @@
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+##
+## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
+
+# User-specific files
+*.rsuser
+*.suo
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Mono auto generated files
+mono_crash.*
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+x64/
+x86/
+[Ww][Ii][Nn]32/
+[Aa][Rr][Mm]/
+[Aa][Rr][Mm]64/
+bld/
+[Bb]in/
+[Oo]bj/
+[Oo]ut/
+[Ll]og/
+[Ll]ogs/
+
+# Visual Studio 2015/2017 cache/options directory
+.vs/
+# Uncomment if you have tasks that create the project's static files in wwwroot
+#wwwroot/
+
+# Visual Studio 2017 auto generated files
+Generated\ Files/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUnit
+*.VisualState.xml
+TestResult.xml
+nunit-*.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# Benchmark Results
+BenchmarkDotNet.Artifacts/
+
+# .NET Core
+project.lock.json
+project.fragment.lock.json
+artifacts/
+
+# ASP.NET Scaffolding
+ScaffoldingReadMe.txt
+
+# StyleCop
+StyleCopReport.xml
+
+# Files built by Visual Studio
+*_i.c
+*_p.c
+*_h.h
+*.ilk
+*.meta
+*.obj
+*.iobj
+*.pch
+*.pdb
+*.ipdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*_wpftmp.csproj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opendb
+*.opensdf
+*.sdf
+*.cachefile
+*.VC.db
+*.VC.VC.opendb
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+*.sap
+
+# Visual Studio Trace Files
+*.e2e
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# AxoCover is a Code Coverage Tool
+.axoCover/*
+!.axoCover/settings.json
+
+# Coverlet is a free, cross platform Code Coverage Tool
+coverage*.json
+coverage*.xml
+coverage*.info
+
+# Visual Studio code coverage results
+*.coverage
+*.coveragexml
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+nCrunchTemp_*
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+# Note: Comment the next line if you want to checkin your web deploy settings,
+# but database connection strings (with potential passwords) will be unencrypted
+*.pubxml
+*.publishproj
+
+# Microsoft Azure Web App publish settings. Comment the next line if you want to
+# checkin your Azure Web App publish settings, but sensitive information contained
+# in these scripts will be unencrypted
+PublishScripts/
+
+# NuGet Packages
+*.nupkg
+# NuGet Symbol Packages
+*.snupkg
+# The packages folder can be ignored because of Package Restore
+**/[Pp]ackages/*
+# except build/, which is used as an MSBuild target.
+!**/[Pp]ackages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/[Pp]ackages/repositories.config
+# NuGet v3's project.json files produces more ignorable files
+*.nuget.props
+*.nuget.targets
+
+# Microsoft Azure Build Output
+csx/
+*.build.csdef
+
+# Microsoft Azure Emulator
+ecf/
+rcf/
+
+# Windows Store app package directories and files
+AppPackages/
+BundleArtifacts/
+Package.StoreAssociation.xml
+_pkginfo.txt
+*.appx
+*.appxbundle
+*.appxupload
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!?*.[Cc]ache/
+
+# Others
+ClientBin/
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.jfm
+*.pfx
+*.publishsettings
+orleans.codegen.cs
+
+# Including strong name files can present a security risk
+# (https://github.com/github/gitignore/pull/2483#issue-259490424)
+#*.snk
+
+# Since there are multiple workflows, uncomment next line to ignore bower_components
+# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
+#bower_components/
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+ServiceFabricBackup/
+*.rptproj.bak
+
+# SQL Server files
+*.mdf
+*.ldf
+*.ndf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+*.rptproj.rsuser
+*- [Bb]ackup.rdl
+*- [Bb]ackup ([0-9]).rdl
+*- [Bb]ackup ([0-9][0-9]).rdl
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# GhostDoc plugin setting file
+*.GhostDoc.xml
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+node_modules/
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
+*.vbw
+
+# Visual Studio LightSwitch build output
+**/*.HTMLClient/GeneratedArtifacts
+**/*.DesktopClient/GeneratedArtifacts
+**/*.DesktopClient/ModelManifest.xml
+**/*.Server/GeneratedArtifacts
+**/*.Server/ModelManifest.xml
+_Pvt_Extensions
+
+# Paket dependency manager
+.paket/paket.exe
+paket-files/
+
+# FAKE - F# Make
+.fake/
+
+# CodeRush personal settings
+.cr/personal
+
+# Python Tools for Visual Studio (PTVS)
+__pycache__/
+*.pyc
+
+# Cake - Uncomment if you are using it
+# tools/**
+# !tools/packages.config
+
+# Tabs Studio
+*.tss
+
+# Telerik's JustMock configuration file
+*.jmconfig
+
+# BizTalk build output
+*.btp.cs
+*.btm.cs
+*.odx.cs
+*.xsd.cs
+
+# OpenCover UI analysis results
+OpenCover/
+
+# Azure Stream Analytics local run output
+ASALocalRun/
+
+# MSBuild Binary and Structured Log
+*.binlog
+
+# NVidia Nsight GPU debugger configuration file
+*.nvuser
+
+# MFractors (Xamarin productivity tool) working folder
+.mfractor/
+
+# Local History for Visual Studio
+.localhistory/
+
+# BeatPulse healthcheck temp database
+healthchecksdb
+
+# Backup folder for Package Reference Convert tool in Visual Studio 2017
+MigrationBackup/
+
+# Ionide (cross platform F# VS Code tools) working folder
+.ionide/
+
+# Fody - auto-generated XML schema
+FodyWeavers.xsd

SlnMesnac.RfidUpload.Analysis/BufferAnalysis.cs

@@ -0,0 +1,26 @@
+using System;
+
+namespace SlnMesnac.RfidUpload.Analysis
+{
+    /// <summary>
+    /// 标签信息解析
+    /// </summary>
+    public sealed class BufferAnalysis
+    {
+        #region 单例实现
+        private static readonly Lazy<BufferAnalysis> _lazy = new Lazy<BufferAnalysis>(() => new BufferAnalysis());
+
+        public static BufferAnalysis Instance
+        {
+            get
+            {
+                return _lazy.Value;
+            }
+        }
+        #endregion
+
+        private BufferAnalysis() { }
+
+
+    }
+}

SlnMesnac.RfidUpload.Analysis/InstructionAdapter.cs

@@ -0,0 +1,85 @@
+using NLog;
+using SlnMesnac.RfidUpload.Common;
+using SlnMesnac.RfidUpload.Model;
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+namespace SlnMesnac.RfidUpload.Analysis
+{
+    /// <summary>
+    /// 指令适配器
+    /// </summary>
+    public class InstructionAdapter
+    {
+        private MsgUtil _msgUtil = MsgUtil.Instance;
+        private static Logger logger = LogManager.GetCurrentClassLogger();
+        #region 单例实现
+        private static readonly Lazy<InstructionAdapter> _lazy = new Lazy<InstructionAdapter>(() => new InstructionAdapter());
+
+        public static InstructionAdapter Instance
+        {
+            get
+            {
+                return _lazy.Value;
+            }
+        }
+        #endregion
+
+        private InstructionAdapter() { }
+
+        /// <summary>
+        /// 标签解析
+        /// </summary>
+        /// <param name="buffer"></param>
+        /// <returns></returns>
+        /// <exception cref="ArgumentException"></exception>
+        public InstructionInfo ParseInstruction(byte[] buffer)
+        {
+            logger.Info("开始解析标签信息");
+            byte[] m_length = new byte[2];
+            Array.Copy(buffer, 2, m_length, 0, 2);
+            int bufferLength = Convert.ToInt32(BitConverter.ToString(m_length).Replace("-", ""), 16);
+
+            if (buffer.Length != bufferLength)
+            {
+                throw new ArgumentException("指令长度不正确");
+            }
+
+            byte[] xorbuffer = new byte[buffer.Length - 3];
+            Array.Copy(buffer, 2, xorbuffer, 0, xorbuffer.Length);
+            string xorStr = _msgUtil.CalculateXORChecksum(xorbuffer);
+            string bufferXor = buffer[buffer.Length - 1].ToString("X2");
+            if (bufferXor != xorStr)
+            {
+                throw new ArgumentException($"XOR校验失败,指令XOR:{bufferXor},计算XOR:{xorStr}");
+            }
+
+            InstructionInfo instructionInfo = new InstructionInfo();
+            byte[] m_stx = new byte[2];
+            Array.Copy(buffer, 0, m_stx, 0, 2);
+            instructionInfo.stx = BitConverter.ToString(m_stx).Replace("-", "");
+
+            instructionInfo.len = bufferLength;
+
+            instructionInfo.cmd = buffer[4];
+
+            int status = Convert.ToInt32(buffer[5]);
+            instructionInfo.status = status;
+
+            byte[] m_data = new byte[bufferLength - 7];
+            Array.Copy(buffer, 6, m_data, 0, m_data.Length);
+            string dataValue = Encoding.ASCII.GetString(m_data);
+            instructionInfo.data = dataValue;
+
+            instructionInfo.xor = buffer[buffer.Length - 1];
+
+            instructionInfo.recordtime = DateTime.Now;
+
+            return instructionInfo;
+        }
+
+
+    }
+
+}

SlnMesnac.RfidUpload.Analysis/SlnMesnac.RfidUpload.Analysis.csproj

@@ -0,0 +1,14 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>netstandard2.1</TargetFramework>
+        <Nullable>enable</Nullable>
+    </PropertyGroup>
+
+    <ItemGroup>
+      <ProjectReference Include="..\SlnMesnac.RfidUpload.Common\SlnMesnac.RfidUpload.Common.csproj" />
+      <ProjectReference Include="..\SlnMesnac.RfidUpload.Model\SlnMesnac.RfidUpload.Model.csproj" />
+      <ProjectReference Include="..\SlnMesnac.RfidUpload.NLog\SlnMesnac.RfidUpload.NLog.csproj" />
+    </ItemGroup>
+
+</Project>

SlnMesnac.RfidUpload.Business/HandleBusiness.cs

@@ -0,0 +1,163 @@
+using SlnMesnac.RfidUpload.Analysis;
+using SlnMesnac.RfidUpload.Common;
+using SlnMesnac.RfidUpload.Model;
+using SlnMesnac.RfidUpload.TouchSocket;
+using System;
+using System.Collections.Generic;
+using System.Linq;
+
+namespace SlnMesnac.RfidUpload.Business
+{
+    /// <summary>
+    /// 业务逻辑处理
+    /// </summary>
+    public class HandleBusiness
+    {
+        private JsonChange _jsonChange = JsonChange.Instance;
+        private InstructionAdapter adapter = InstructionAdapter.Instance;
+        private WebApiClientApp _webApiClientApp = WebApiClientApp.Instance;
+
+        private List<InstructionInfo> instructionInfoList = new List<InstructionInfo>();
+
+        #region 单例实现
+        private static readonly Lazy<HandleBusiness> _lazy = new Lazy<HandleBusiness>(() => new HandleBusiness());
+
+        public static HandleBusiness Instance
+        {
+            get
+            {
+                return _lazy.Value;
+            }
+        }
+        #endregion
+
+        #region 委托事件
+
+        /// <summary>
+        /// 刷新标签解析
+        /// </summary>
+        public delegate void RefreshInstructionInfoDataGrid(InstructionInfo instructionInfo);
+        public event RefreshInstructionInfoDataGrid InstructionInfoDataGridEvent;
+
+        /// <summary>
+        /// 刷新日志内容
+        /// </summary>
+        public delegate void RefreshLogMessage(string message);
+        public event RefreshLogMessage RefreshLogMessageEvent;
+
+        #endregion
+
+        private HandleBusiness() { }
+
+
+
+        /// <summary>
+        /// 标签处理
+        /// </summary>
+        /// <param name="buffer"></param>
+        /// <exception cref="ArgumentException"></exception>
+        public void LabelHandle(byte[] buffer)
+        {
+            //功能码判断
+            if (buffer[4] == 0x31)
+            {
+                try
+                {
+                    InstructionInfo info = adapter.ParseInstruction(buffer);
+
+                    if (info != null)
+                    {
+                        if (FilterTags(info))
+                        {
+                            instructionInfoList.Add(info);
+                            RefreshLogMessageEvent?.Invoke($"标签解析数据：{_jsonChange.ModeToJson(info)}");
+
+                            InstructionInfoDataGridEvent?.Invoke(info);
+                        }
+                        else
+                        {
+                            RefreshLogMessageEvent?.Invoke($"标签：{info.data};与前次读取间隔小于1分钟，不进行逻辑处理");
+                        }
+                    }
+                }
+                catch (Exception e)
+                {
+                    RefreshLogMessageEvent?.Invoke($"标签解析异常:{e.Message}");
+                }
+
+            }
+        }
+
+        /// <summary>
+        /// 粘包处理
+        /// </summary>
+        /// <param name="receivedData"></param>
+        /// <returns></returns>
+        public List<byte[]> SplitPackets(byte[] receivedData)
+        {
+            List<byte[]> packets = new List<byte[]>();
+            int index = 0;
+            while (index < receivedData.Length)
+            {
+                if (receivedData[index] == 0xAA && receivedData[index + 1] == 0x55)
+                {
+                    int packetLength = (receivedData[index + 2] << 8) | receivedData[index + 3];
+                    if (packetLength <= receivedData.Length - index)
+                    {
+                        byte[] packet = new byte[packetLength];
+                        Array.Copy(receivedData, index, packet, 0, packetLength);
+                        packets.Add(packet);
+                        index += packetLength;
+                    }
+                    else
+                    {
+                        break;
+                    }
+                }
+                else
+                {
+                    index++;
+                }
+            }
+            return packets;
+        }
+
+        public void apiTest(string url)
+        {
+            //WebApiClientApp api = new WebApiClientApp();
+            _webApiClientApp.Upload(url);
+        }
+
+        /// <summary>
+        /// 标签过滤：同一标签1分钟内不进行逻辑处理
+        /// </summary>
+        /// <param name="instructionInfo"></param>
+        /// <returns></returns>
+        private bool FilterTags(InstructionInfo instructionInfo)
+        {
+
+            InstructionInfo lastInstructionInfo = instructionInfoList.Where(x => x.data == instructionInfo.data).FirstOrDefault();
+
+            if(lastInstructionInfo == null)
+            {
+                return true;
+            }
+            else
+            {
+                TimeSpan timeDifference = instructionInfo.recordtime.Subtract(lastInstructionInfo.recordtime);
+                double minutesDifference = timeDifference.TotalMinutes;
+
+                if (minutesDifference < 1)
+                {
+                    return false;
+                }
+                else
+                {
+                    instructionInfoList.Remove(lastInstructionInfo);
+                    return true;
+                }
+            }
+
+        }
+    }
+}

SlnMesnac.RfidUpload.Business/SerialPortBusiness.cs

@@ -0,0 +1,124 @@
+using System;
+using System.IO.Ports;
+using System.Linq;
+using System.Threading;
+
+namespace SlnMesnac.RfidUpload.Business
+{
+    /// <summary>
+    /// 串口通讯类
+    /// </summary>
+    public class SerialPortBusiness
+    {
+
+        #region 单例实现
+        private static readonly Lazy<SerialPortBusiness> _lazy = new Lazy<SerialPortBusiness>(() => new SerialPortBusiness());
+
+        public static SerialPortBusiness Instance
+        {
+            get
+            {
+                return _lazy.Value;
+            }
+        }
+        #endregion
+
+        #region 委托事件
+
+        /// <summary>
+        /// 刷新标签解析
+        /// </summary>
+        public delegate void ReceivedData(byte[] buffer);
+        public event ReceivedData ReceivedDataEvent;
+
+        /// <summary>
+        /// 刷新日志内容
+        /// </summary>
+        public delegate void RefreshLogMessage(string message);
+        public event RefreshLogMessage RefreshLogMessageEvent;
+
+        #endregion
+
+        private SerialPort _serialPort;
+
+        private SerialPortBusiness()
+        {
+
+        }
+
+        /// <summary>
+        /// 打开串口
+        /// </summary>
+        public void Open()
+        {
+            string port = System.IO.Ports.SerialPort.GetPortNames().FirstOrDefault();
+            _serialPort = new SerialPort(port, 115200, Parity.None, 8, StopBits.One);
+            _serialPort.DataReceived += SerialPortDataReceived;
+
+            _serialPort.Open();
+        }
+
+        /// <summary>
+        /// 关闭串口
+        /// </summary>
+        public void Close()
+        {
+            if (_serialPort != null)
+            {
+                _serialPort.Close();
+            }
+            else
+            {
+                throw new ArgumentException("_serialPort == null");
+            }
+        }
+
+        /// <summary>
+        /// 接收数据
+        /// </summary>
+        /// <param name="sender"></param>
+        /// <param name="e"></param>
+        private void SerialPortDataReceived(object sender, SerialDataReceivedEventArgs e)
+        {
+            try
+            {
+                Thread.Sleep(200);
+                int bytesToRead = _serialPort.BytesToRead;
+                byte[] buffer = new byte[bytesToRead];
+
+                _serialPort.Read(buffer, 0, bytesToRead);
+
+                RefreshLogMessageEvent?.Invoke("Received data: " + BitConverter.ToString(buffer).Replace("-", " "));
+
+                if (CheckReceivedData(buffer))
+                {
+                    ReceivedDataEvent?.Invoke(buffer);
+                }
+                else
+                {
+                    RefreshLogMessageEvent?.Invoke("心跳指令不进行逻辑处理");
+                }
+            }
+            catch (Exception ex)
+            {
+                RefreshLogMessageEvent?.Invoke($"接收数据异常:{ex.Message}");
+            }
+        }
+
+        /// <summary>
+        /// 判断是否为业务数据
+        /// </summary>
+        /// <param name="data"></param>
+        /// <returns></returns>
+        private bool CheckReceivedData(byte[] data)
+        {
+
+            if (data.Length > 4)
+            {
+                return true;
+            }
+
+            return false;
+        }
+    }
+}

SlnMesnac.RfidUpload.Business/SlnMesnac.RfidUpload.Business.csproj

@@ -0,0 +1,18 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>netstandard2.1</TargetFramework>
+        <Nullable>enable</Nullable>
+    </PropertyGroup>
+
+    <ItemGroup>
+      <ProjectReference Include="..\SlnMesnac.RfidUpload.Analysis\SlnMesnac.RfidUpload.Analysis.csproj" />
+      <ProjectReference Include="..\SlnMesnac.RfidUpload.Common\SlnMesnac.RfidUpload.Common.csproj" />
+      <ProjectReference Include="..\SlnMesnac.RfidUpload.TouchSocket\SlnMesnac.RfidUpload.TouchSocket.csproj" />
+    </ItemGroup>
+
+    <ItemGroup>
+      <PackageReference Include="System.IO.Ports" Version="8.0.0" />
+    </ItemGroup>
+
+</Project>

SlnMesnac.RfidUpload.Common/JsonChange.cs

@@ -0,0 +1,109 @@
+using Nancy.Json;
+using Newtonsoft.Json;
+using Newtonsoft.Json.Linq;
+using System;
+using System.Collections.Generic;
+
+namespace SlnMesnac.RfidUpload.Common
+{
+    public sealed class JsonChange
+    {
+
+        private static readonly Lazy<JsonChange> lazy = new Lazy<JsonChange>(() => new JsonChange());
+
+        public static JsonChange Instance
+        {
+            get
+            {
+                return lazy.Value;
+            }
+        }
+
+        private JsonChange() { }
+
+        /// <summary>
+        /// Model 实体转json
+        /// </summary>
+        /// <param name="Model">可以是单个实体，也可是实体集（即：ToList()）</param>
+        /// <returns></returns>
+        public string ModeToJson(object Model)
+        {
+            JavaScriptSerializer serializer = new JavaScriptSerializer();
+            try
+            {
+                string str = serializer.Serialize(Model);
+                return str;
+            }
+            catch (Exception)
+            {
+                return "";
+            }
+        }
+
+        /// <summary>
+        /// json实体转Model 
+        /// </summary>
+        /// <typeparam name="T"></typeparam>
+        /// <param name="jsonStr"></param>
+        /// <returns></returns>
+        public T JsonToMode<T>(string jsonStr)
+        {
+            JavaScriptSerializer serializer = new JavaScriptSerializer();
+            try
+            {
+                var info = serializer.Deserialize<T>(jsonStr);
+                return info;
+            }
+            catch (Exception)
+            {
+                return default(T);
+            }
+        }
+
+        /// <summary>
+        /// object转dictionary
+        /// </summary>
+        /// <param name="jsonData"></param>
+        /// <returns></returns>
+        public Dictionary<string, object> objectToDictionary(string jsonData)
+        {
+            Dictionary<string, object> result = new Dictionary<string, object>();
+
+            var inf = JsonConvert.DeserializeObject<Dictionary<string, object>>(jsonData);
+
+            foreach (KeyValuePair<string, object> item in inf)
+            {
+                if (item.Value != null)
+                {
+                    var type = item.Value.GetType();
+                    if (type == typeof(JObject))
+                    {
+                        var info = objectToDictionary(JsonConvert.SerializeObject(item.Value));
+                        foreach (KeyValuePair<string, object> ite in info)
+                        {
+                            result.Add(ite.Key, ite.Value);
+                        }
+                        continue;
+                    }
+                    else if (type == typeof(JArray))
+                    {
+                        JArray array = (JArray)item.Value;
+                        var info = objectToDictionary(JsonConvert.SerializeObject(array[0]));
+                        foreach (KeyValuePair<string, object> ite in info)
+                        {
+                            result.Add(item.Key + ite.Key, ite.Value);
+                        }
+                        continue;
+                    }
+                }
+
+                result.Add(item.Key, item.Value);
+            }
+
+            return result;
+        }
+
+
+
+    }
+}

SlnMesnac.RfidUpload.Common/MsgUtil.cs

@@ -0,0 +1,309 @@
+using System;
+using System.Runtime.InteropServices;
+using System.Text;
+
+namespace SlnMesnac.RfidUpload.Common
+{
+    /// <summary>
+    /// 工具类
+    /// </summary>
+    public sealed class MsgUtil
+    {
+
+        private static readonly Lazy<MsgUtil> lazy = new Lazy<MsgUtil>(() => new MsgUtil());
+
+        public static MsgUtil Instance
+        {
+            get
+            {
+                return lazy.Value;
+            }
+        }
+
+        private MsgUtil() { }
+
+        #region 数据解析公共方法
+        /// <summary>
+        /// 字节数组转换成结构体
+        /// </summary>
+        /// <param name="buf"></param>
+        /// <param name="len"></param>
+        /// <param name="type"></param>
+        /// <returns></returns>
+        public static object BytesToStruct(byte[] buf, int len, Type type)
+        {
+            object rtn;
+            IntPtr buffer = Marshal.AllocHGlobal(len);
+            Marshal.Copy(buf, 0, buffer, len);
+            try
+            {
+                rtn = Marshal.PtrToStructure(buffer, type);
+                Marshal.FreeHGlobal(buffer);
+            }
+            catch (Exception)
+            {
+                return null;
+            }
+            return rtn;
+        }
+
+        public string StringToHexString(string s, Encoding encode)
+        {
+
+            byte[] b = encode.GetBytes(s);          //按照指定编码将string编程字节数组
+            string result = string.Empty;
+            for (int i = 0; i < b.Length; i++)      //逐字节变为16进制字符，以%隔开
+            {
+                result += "%" + Convert.ToString(b[i], 16);
+            }
+            return result;
+        }
+
+        //// <summary>
+        /// 结构体转byte数组
+        /// </summary>
+        /// <param name="structObj">要转换的结构体</param>
+        /// <returns>转换后的byte数组</returns>
+        public static byte[] StructToBytes(object structObj)
+        {
+            //得到结构体的大小
+            int size = Marshal.SizeOf(structObj);
+            //创建byte数组
+            byte[] bytes = new byte[size];
+            //分配结构体大小的内存空间
+            IntPtr structPtr = Marshal.AllocHGlobal(size);
+            //将结构体拷到分配好的内存空间
+            Marshal.StructureToPtr(structObj, structPtr, false);
+            //从内存空间拷到byte数组
+            Marshal.Copy(structPtr, bytes, 0, size);
+            //释放内存空间
+            Marshal.FreeHGlobal(structPtr);
+            //返回byte数组
+            return bytes;
+        }
+
+
+        #endregion
+        #region 消息验证方法
+
+        /// <summary>
+        /// CS和校验
+        /// </summary>
+        /// <param name="Abyte"></param>
+        /// <returns></returns>
+        public byte Check_CS(byte[] Abyte)
+        {
+            byte result = new byte();
+            try
+            {
+                int num = 0;
+                for (int i = 0; i < Abyte.Length; i++)
+                {
+                    num = (num + Abyte[i]) % 256;
+                }
+                result = (byte)num;
+            }
+            catch
+            {
+                result = 0;
+            }
+            return result;
+        }
+
+        /// <summary>
+        /// BCC异或取反校验
+        /// </summary>
+        /// <param name="data"></param>
+        /// <returns></returns>
+        public string getBCC(byte[] data)
+        {
+            String ret = "";
+            byte[] BCC = new byte[1];
+            for (int i = 0; i < data.Length; i++)
+            {
+                BCC[0] = (byte)(BCC[0] ^ data[i]);
+            }
+            String hex = ((~BCC[0]) & 0xFF).ToString("X");//取反操作
+            if (hex.Length == 1)
+            {
+                hex = '0' + hex;
+            }
+            ret += hex.ToUpper();
+            return ret;
+        }
+
+        static int BytesToInt(byte[] b, int length)
+        {
+            int temp = 0;
+            for (int i = 0; i <= length - 1 && i < 4; i++)
+            {
+                temp += (int)(b[i] << (i * 8));
+            }
+            return temp;
+        }
+
+        public static byte[] CalculateVerify(byte[] pMessage, int iLength)
+        {
+            UInt16 i;
+            int iVerify = 0;
+
+            iVerify = pMessage[0];
+            for (i = 0; i < iLength - 1; i++)
+            {
+                iVerify = iVerify + pMessage[i + 1];
+            }
+            return BitConverter.GetBytes(Convert.ToUInt16(iVerify));
+        }
+        #endregion
+        public byte[] HexStrTorbytes(string strHex)//e.g. " 01 01" ---> { 0x01, 0x01}
+        {
+            strHex = strHex.Replace(" ", "");
+            if ((strHex.Length % 2) != 0)
+                strHex += " ";
+            byte[] returnBytes = new byte[strHex.Length / 2];
+            for (int i = 0; i < returnBytes.Length; i++)
+                returnBytes[i] = Convert.ToByte(strHex.Substring(i * 2, 2), 16);
+            return returnBytes;
+        }
+
+        /// <summary>
+        /// 将字符串强制转换成int，转换失败则返回0
+        /// </summary>
+        /// <param name="str"></param>
+        /// <returns></returns>
+        public int ParseToInt(string str)
+        {
+            int returnInt = 0;
+
+            if (str == null || str.Trim().Length < 1)
+            {
+                return returnInt;
+            }
+
+            if (int.TryParse(str, out returnInt))
+            {
+                return returnInt;
+            }
+            else
+            {
+                return 0;
+            }
+        }
+
+        public byte[] HexToString(string Str)
+        {
+            byte[] str = new byte[Str.Length / 2];
+            for (int i = 0; i < str.Length; i++)
+            {
+                int temp = Convert.ToInt32(Str.Substring(i * 2, 2), 16);
+                str[i] = (byte)temp;
+            }
+            return str;
+        }
+        public string ConverToString(byte[] data)
+        {
+            string str;
+            StringBuilder stb = new StringBuilder();
+            for (int i = 0; i < data.Length; i++)
+            {
+                if ((int)data[i] > 15)
+                {
+                    stb.Append(Convert.ToString(data[i], 16).ToUpper()); //添加字符串
+                }
+                else  //如果是小于0F需要加个零
+                {
+                    stb.Append("0" + Convert.ToString(data[i], 16).ToUpper());
+                }
+            }
+            str = stb.ToString();
+            return str;
+        }
+
+        public string bytesToHexStr(byte[] bytes, int iLen)
+        {
+            StringBuilder sb = new StringBuilder();
+            if (bytes != null)
+            {
+                for (int i = 0; i < iLen; i++)
+                {
+                    sb.Append(bytes[i].ToString("X2"));
+                }
+            }
+            return sb.ToString();
+        }
+
+        /// <summary>
+        /// 从十进制转换到十六进制
+        /// </summary>
+        /// <param name="ten"></param>
+        /// <returns></returns>
+        public string Ten2Hex(string ten)
+        {
+            ulong tenValue = Convert.ToUInt64(ten);
+            ulong divValue, resValue;
+            string hex = "";
+            do
+            {
+                //divValue = (ulong)Math.Floor(tenValue / 16);
+
+                divValue = (ulong)Math.Floor((decimal)(tenValue / 16));
+
+                resValue = tenValue % 16;
+                hex = tenValue2Char(resValue) + hex;
+                tenValue = divValue;
+            }
+            while (tenValue >= 16);
+            if (tenValue != 0)
+                hex = tenValue2Char(tenValue) + hex;
+            return hex;
+        }
+
+        /// <summary>
+        /// 异或和校验
+        /// </summary>
+        /// <param name="bytes"></param>
+        /// <returns></returns>
+        public string CalculateXORChecksum(byte[] bytes)
+        {
+            byte checksum = bytes[0];
+            foreach (byte b in bytes)
+            {
+                checksum ^= b;
+            }
+
+            return checksum.ToString("X2");
+        }
+
+        public string tenValue2Char(ulong ten)
+        {
+            switch (ten)
+            {
+                case 0:
+                case 1:
+                case 2:
+                case 3:
+                case 4:
+                case 5:
+                case 6:
+                case 7:
+                case 8:
+                case 9:
+                    return ten.ToString();
+                case 10:
+                    return "A";
+                case 11:
+                    return "B";
+                case 12:
+                    return "C";
+                case 13:
+                    return "D";
+                case 14:
+                    return "E";
+                case 15:
+                    return "F";
+                default:
+                    return "";
+            }
+        }
+    }
+}

SlnMesnac.RfidUpload.Common/SlnMesnac.RfidUpload.Common.csproj

@@ -0,0 +1,13 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>netstandard2.1</TargetFramework>
+        <Nullable>enable</Nullable>
+    </PropertyGroup>
+
+    <ItemGroup>
+      <PackageReference Include="Nancy" Version="2.0.0" />
+      <PackageReference Include="Newtonsoft.Json" Version="13.0.3" />
+    </ItemGroup>
+
+</Project>

SlnMesnac.RfidUpload.Config/AppConfig.cs

@@ -0,0 +1,28 @@
+using System;
+using Microsoft.Extensions.Options;
+
+namespace SlnMesnac.RfidUpload.Config
+{
+    /// <summary>
+    /// 系统配置
+    /// </summary>
+    public class AppConfig : IOptions<AppConfig>
+    {
+        /// <summary>
+        /// 日志文件路径
+        /// </summary>
+        public string logPath { get; set; }
+
+        /// <summary>
+        /// MES 数据库连接字符串
+        /// </summary>
+        public string mesConnStr { get; set; }
+
+        /// <summary>
+        /// MCS 数据库连接字符串
+        /// </summary>
+        public string mcsConnStr { get; set; }
+
+        public AppConfig Value => this;
+    }
+}

SlnMesnac.RfidUpload.Config/SlnMesnac.RfidUpload.Config.csproj

@@ -0,0 +1,12 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>netstandard2.1</TargetFramework>
+        <Nullable>enable</Nullable>
+    </PropertyGroup>
+
+    <ItemGroup>
+      <PackageReference Include="Microsoft.Extensions.Options" Version="8.0.0" />
+    </ItemGroup>
+
+</Project>

SlnMesnac.RfidUpload.Model/ContainerInbound.cs

@@ -0,0 +1,43 @@
+namespace SlnMesnac.RfidUpload.Model
+{
+    /// <summary>
+    /// 容器入库
+    /// </summary>
+    public class ContainerInbound
+    {
+        /// <summary>
+        /// 入参1，请求报文到消息头
+        /// </summary>
+        public string messageHeader { get; set; }
+
+        /// <summary>
+        /// 入参2，将下列参数封装到batchOpenQuery
+        /// </summary>
+        public string batchOpenQuery { get; set; }
+
+        /// <summary>
+        /// 机构代码
+        /// </summary>
+        public string opOrgCode { get; set; }
+
+        /// <summary>
+        /// 登录人代码
+        /// </summary>
+        public string userCode { get; set; }
+
+        /// <summary>
+        /// 登录人名称
+        /// </summary>
+        public string userName { get; set; }
+
+        /// <summary>
+        /// 省份代码
+        /// </summary>
+        public string province { get; set; }
+
+        /// <summary>
+        /// 容器条码
+        /// </summary>
+        public string rqtm { get; set; }
+    }
+}

SlnMesnac.RfidUpload.Model/ContainerSealed.cs

@@ -0,0 +1,83 @@
+namespace SlnMesnac.RfidUpload.Model
+{
+    /// <summary>
+    /// 容器封发扫描
+    /// </summary>
+    public class ContainerSealed
+    {
+        /// <summary>
+        /// 入参1，请求报文到消息头
+        /// </summary>
+        public string messageHeader { get; set; }
+
+        /// <summary>
+        /// 入参2，将下列参数封装到containerRegisterQuery
+        /// </summary>
+        public string containerRegisterQuery { get; set; }
+
+        /// <summary>
+        /// 机构代码
+        /// </summary>
+        public string opOrgCode { get; set; }
+
+        /// <summary>
+        /// 机构名称
+        /// </summary>
+        public string opOrgName { get; set; }
+
+        /// <summary>
+        /// 登录人代码
+        /// </summary>
+        public string userCode { get; set; }
+
+        /// <summary>
+        /// 登录人名称
+        /// </summary>
+        public string userName { get; set; }
+
+        /// <summary>
+        /// 省份代码
+        /// </summary>
+        public string province { get; set; }
+
+        /// <summary>
+        /// 容器种类名称
+        /// </summary>
+        public string rqzlmc { get; set; }
+
+        /// <summary>
+        /// 总包Id
+        /// </summary>
+        public string zbid { get; set; }
+
+        /// <summary>
+        /// 寄达局名称
+        /// </summary>
+        public string destinationOrgName { get; set; }
+
+        /// <summary>
+        /// 寄达局编号
+        /// </summary>
+        public string destinationOrgCode { get; set; }
+
+        /// <summary>
+        /// 容器种类
+        /// </summary>
+        public string rqzl { get; set; }
+
+        /// <summary>
+        /// 容器型号
+        /// </summary>
+        public string rqxh { get; set; }
+
+        /// <summary>
+        /// 容器型号名称
+        /// </summary>
+        public string rqxhmc { get; set; }
+
+        /// <summary>
+        /// 容器条码
+        /// </summary>
+        public string rqtm { get; set; }
+    }
+}

SlnMesnac.RfidUpload.Model/InstructionInfo.cs

@@ -0,0 +1,55 @@
+using MiniExcelLibs.Attributes;
+using System;
+
+namespace SlnMesnac.RfidUpload.Model
+{
+    /// <summary>
+    /// 指令信息
+    /// </summary>
+    public class InstructionInfo
+    {
+        /// <summary>
+        /// 
+        /// </summary>
+        [ExcelColumn(Name = "stx",Index = 0),ExcelColumnWidth(23)]
+        public string stx { get; set; }
+
+        /// <summary>
+        /// 报文长度，包含帧头、校验
+        /// </summary>
+        [ExcelColumn(Name = "len", Index = 1), ExcelColumnWidth(23)]
+        public int len { get; set; }
+
+        /// <summary>
+        /// 报文类型0x31
+        /// </summary>
+        [ExcelColumn(Name = "cmd", Index = 2), ExcelColumnWidth(23)]
+        public byte cmd { get; set; }
+
+        /// <summary>
+        /// 擦除状态：0-成功；1-失败
+        /// </summary>
+        [ExcelColumn(Name = "status", Index = 3), ExcelColumnWidth(23)]
+        public int status { get; set; }
+
+        /// <summary>
+        /// 数据
+        /// </summary>
+        [ExcelColumn(Name = "data", Index = 4), ExcelColumnWidth(53)]
+        public string data { get; set; }
+
+        /// <summary>
+        /// 异或和校验，10进制
+        /// </summary>
+        [ExcelColumn(Name = "xor", Index = 5), ExcelColumnWidth(23)]
+        public byte xor { get; set; }
+
+        /// <summary>
+        /// 记录时间
+        /// </summary>
+        [ExcelColumn(Name = "recordtime", Index = 6), ExcelColumnWidth(23)]
+        public DateTime recordtime { get; set; }
+
+
+    }
+}

SlnMesnac.RfidUpload.Model/SlnMesnac.RfidUpload.Model.csproj

@@ -0,0 +1,12 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>netstandard2.1</TargetFramework>
+        <Nullable>enable</Nullable>
+    </PropertyGroup>
+
+    <ItemGroup>
+      <PackageReference Include="MiniExcel" Version="1.31.2" />
+    </ItemGroup>
+
+</Project>

SlnMesnac.RfidUpload.NLog/SlnMesnac.RfidUpload.NLog.csproj

@@ -0,0 +1,25 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>netstandard2.1</TargetFramework>
+        <Nullable>enable</Nullable>
+    </PropertyGroup>
+
+    <ItemGroup>
+      <EmbeddedResource Remove="C:\Users\Administrator\.nuget\packages\nlog.config\4.7.15\contentFiles\any\any\NLog.config" />
+    </ItemGroup>
+
+    <ItemGroup>
+      <ApplicationDefinition Include="C:\Users\Administrator\.nuget\packages\nlog.config\4.7.15\contentFiles\any\any\NLog.config" />
+    </ItemGroup>
+
+    <ItemGroup>
+      <None Include="C:\Users\Administrator\.nuget\packages\nlog.config\4.7.15\contentFiles\any\any\NLog.config" />
+    </ItemGroup>
+
+    <ItemGroup>
+      <PackageReference Include="NLog.Config" Version="4.7.15" />
+      <PackageReference Include="NLog.Web.AspNetCore" Version="5.3.7" />
+    </ItemGroup>
+
+</Project>

SlnMesnac.RfidUpload.TouchSocket/SlnMesnac.RfidUpload.TouchSocket.csproj

@@ -0,0 +1,16 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>netstandard2.1</TargetFramework>
+        <Nullable>enable</Nullable>
+    </PropertyGroup>
+
+    <ItemGroup>
+      <PackageReference Include="TouchSocket" Version="1.3.9" />
+    </ItemGroup>
+
+    <ItemGroup>
+      <ProjectReference Include="..\SlnMesnac.RfidUpload.Model\SlnMesnac.RfidUpload.Model.csproj" />
+    </ItemGroup>
+
+</Project>

SlnMesnac.RfidUpload.TouchSocket/WebApiClientApp.cs

@@ -0,0 +1,57 @@
+using SlnMesnac.RfidUpload.Model;
+using System;
+using TouchSocket.Rpc.WebApi;
+
+namespace SlnMesnac.RfidUpload.TouchSocket
+{
+    public sealed class WebApiClientApp
+    {
+
+        #region 单例实现
+        private static readonly Lazy<WebApiClientApp> _lazy = new Lazy<WebApiClientApp>(() => new WebApiClientApp());
+
+        public static WebApiClientApp Instance
+        {
+            get
+            {
+                return _lazy.Value;
+            }
+        }
+        #endregion
+
+        private WebApiClientApp() { }
+
+        private WebApiClient CreateWebApiClient(string url)
+        {
+            WebApiClient client = new WebApiClient();
+            client.Setup(url);
+            client.Connect();
+            Console.WriteLine("连接成功");
+            return client;
+        }
+
+        public void Upload(string url)
+        {
+            try
+            {
+                var client = CreateWebApiClient(url);
+
+                var param = new ContainerInbound()
+                {
+                    messageHeader = Guid.NewGuid().ToString(),
+                    batchOpenQuery = "OK",
+                    opOrgCode = Guid.NewGuid().ToString()
+                };
+
+                var sum2 = client.Invoke<ActionResult>("POST:/Server/ContainerInboundApi", null, param);
+                Console.WriteLine($"Post调用成功，结果：{sum2.Message}");
+
+            }
+            catch (Exception e)
+            {
+                Console.WriteLine(e.Message);
+            }
+
+        }
+    }
+}

SlnMesnac.RfidUpload.UI/App.xaml

@@ -0,0 +1,14 @@
+<Application x:Class="SlnMesnac.RfidUpload.UI.App"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:local="clr-namespace:SlnMesnac.RfidUpload.UI"
+             StartupUri="MainWindow.xaml">
+    <Application.Resources>
+        <!--Button样式-->
+        <ResourceDictionary>
+            <ResourceDictionary.MergedDictionaries>
+                <ResourceDictionary Source="templates/style/resourceStyle.xaml"/>
+            </ResourceDictionary.MergedDictionaries>
+        </ResourceDictionary>
+    </Application.Resources>
+</Application>

SlnMesnac.RfidUpload.UI/App.xaml.cs

@@ -0,0 +1,11 @@
+using System.Windows;
+
+namespace SlnMesnac.RfidUpload.UI
+{
+    /// <summary>
+    /// Interaction logic for App.xaml
+    /// </summary>
+    public partial class App : Application
+    {
+    }
+}

SlnMesnac.RfidUpload.UI/AssemblyInfo.cs

@@ -0,0 +1,10 @@
+using System.Windows;
+
+[assembly: ThemeInfo(
+    ResourceDictionaryLocation.None, //where theme specific resource dictionaries are located
+                                     //(used if a resource is not found in the page,
+                                     // or application resource dictionaries)
+    ResourceDictionaryLocation.SourceAssembly //where the generic resource dictionary is located
+                                              //(used if a resource is not found in the page,
+                                              // app, or any theme specific resource dictionaries)
+)]

SlnMesnac.RfidUpload.UI/MainWindow.xaml

@@ -0,0 +1,134 @@
+<Window x:Class="SlnMesnac.RfidUpload.UI.MainWindow"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+        xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
+        xmlns:local="clr-namespace:SlnMesnac.RfidUpload.UI"
+        mc:Ignorable="d"
+         Title="海威物联RFID移动盘点系统" Height="766" Width="1268"  ResizeMode="NoResize" Topmost="False">
+    <!--<Window.Background>
+        <ImageBrush ImageSource="/templates/image/background.jpg" />
+    </Window.Background>-->
+    <Border Margin="5" Background="White" CornerRadius="10">
+
+        <Grid>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="2*"/>
+                <RowDefinition Height="10*"/>
+                <RowDefinition Height="5*"/>
+            </Grid.RowDefinitions>
+            <Border Grid.Row="0" BorderThickness="2" CornerRadius="5" Background="White" Margin="5,0,5,0">
+                <Border.Effect>
+                    <DropShadowEffect Color="Gray" ShadowDepth="0" BlurRadius="5" Opacity="0.3" Direction="0"></DropShadowEffect>
+                </Border.Effect>
+
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="3*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <StackPanel Grid.Column="0" VerticalAlignment="Center"  HorizontalAlignment="Left" Orientation="Horizontal">
+                        <Button Content="打开串口"  Command="{Binding OpenSerialPortCommand}" Style="{StaticResource  BUTTON_AGREE}"  Width="100" Height="30" Background="#009900" BorderBrush="#009900" Margin="10,0,10,0"/>
+                        <Button Content="关闭串口"  Command="{Binding CloseSerialPortCommand}" Style="{StaticResource  BUTTON_AGREE}"  Width="100" Height="30" Background="#FF0033" BorderBrush="#FF0033" Margin="0,0,10,0"/>
+                        <Button Content="导出文件"  Command="{Binding ExportFilesCommand}" Style="{StaticResource  BUTTON_AGREE}"  Width="100" Height="30" Background="#007DFA" BorderBrush="#007DFA" Margin="0,0,10,0"/>
+                        <Button Content="清空列表"  Command="{Binding EmptyFilesCommand}" Style="{StaticResource  BUTTON_AGREE}"  Width="100" Height="30" Background="Orange" BorderBrush="Orange" Margin="0,0,10,0"/>
+
+                        <Label Content="数 量 :" FontSize="20" FontWeight="Black" Foreground="#00CC33" Margin="20,0,0,0"/>
+                        <Label Content="{Binding LabelCountParam}" FontSize="20" FontWeight="Black" Foreground="#00CC33" Margin="5,0,10,0"/>
+                    </StackPanel>
+
+                    <StackPanel Grid.Column="1" VerticalAlignment="Center"  HorizontalAlignment="Right" Orientation="Horizontal">
+                        <Grid>
+                            <Grid.ColumnDefinitions>
+                                <ColumnDefinition Width="*"/>
+                                <ColumnDefinition Width="*"/>
+                            </Grid.ColumnDefinitions>
+                            <StackPanel Grid.Column="0"  VerticalAlignment="Center">
+                                <TextBlock Text="串口连接状态" FontSize="20"  FontWeight="Black" Foreground="#006699" Margin="2,0,10,0"/>
+                            </StackPanel>
+                            <StackPanel Grid.Column="1" Margin="0,0,20,0">
+                                <Ellipse Width="30" Height="30">
+                                    <Ellipse.Style>
+                                        <Style TargetType="Ellipse">
+                                            <Style.Triggers>
+                                                <DataTrigger Binding="{Binding RfidDeviceStatus}" Value="0">
+                                                    <Setter Property="Shape.Fill" Value="Orange"/>
+                                                </DataTrigger>
+                                                <DataTrigger Binding="{Binding RfidDeviceStatus}" Value="1">
+                                                    <Setter Property="Shape.Fill" Value="Green"/>
+                                                </DataTrigger>
+                                                <DataTrigger Binding="{Binding RfidDeviceStatus}" Value="2">
+                                                    <Setter Property="Shape.Fill" Value="Red"/>
+                                                </DataTrigger>
+                                            </Style.Triggers>
+                                        </Style>
+                                    </Ellipse.Style>
+                                </Ellipse>
+                            </StackPanel>
+                        </Grid>
+
+                    </StackPanel>
+                </Grid>
+                
+            </Border>
+            <Border Grid.Row="1" BorderThickness="2" CornerRadius="5" Background="White" Margin="5">
+                <Border.Effect>
+                    <DropShadowEffect Color="Gray" ShadowDepth="0" BlurRadius="5" Opacity="0.3" Direction="0"></DropShadowEffect>
+                </Border.Effect>
+                <Grid>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="2*"/>
+                        <RowDefinition Height="15*"/>
+
+                    </Grid.RowDefinitions>
+                    <Border Grid.Row="0" BorderBrush="CadetBlue" BorderThickness="0,0,0,0" CornerRadius="0" Background="Transparent" Margin="1,1,5,5" >
+                        <TextBlock Text="标签信息" FontSize="17" FontWeight="Bold" Foreground="#0288d1" VerticalAlignment="Center" HorizontalAlignment="Center"/>
+                    </Border>
+
+                    <!--日志信息-->
+                    <DataGrid Grid.Row="1" Name="DG" ItemsSource="{Binding LabelInfoDataGrid}" Background="Transparent" 
+                                  FontSize="15" ColumnHeaderHeight="35" 
+                                  RowHeight="31" AutoGenerateColumns="False" RowHeaderWidth="0" 
+                                  GridLinesVisibility="None" ScrollViewer.HorizontalScrollBarVisibility="Hidden" 
+                                  ScrollViewer.VerticalScrollBarVisibility="Hidden" BorderThickness="0" CanUserAddRows="False"
+                                  Foreground="#0288d1" >
+                        <!--resourceStyle 399行修改选中字体颜色-->
+                        <DataGrid.Columns>
+                            <DataGridTextColumn Binding="{Binding stx}" Header="stx" Width="80" IsReadOnly="True"/>
+                            <DataGridTextColumn Binding="{Binding len}" Header="len" Width="150" IsReadOnly="True"/>
+                            <DataGridTextColumn Binding="{Binding cmd}" Header="cmd" Width="150" IsReadOnly="True"/>
+                            <DataGridTextColumn Binding="{Binding status}" Header="status" Width="150" IsReadOnly="True"/>
+                            <DataGridTextColumn Binding="{Binding data}" Header="data" Width="290" IsReadOnly="True"/>
+                            <DataGridTextColumn Binding="{Binding xor}" Header="xor" Width="150" IsReadOnly="True"/>
+                            <DataGridTextColumn Binding="{Binding recordtime,StringFormat=\{0:MM月dd日 HH:mm.ss.ffff\}}" Header="时间" Width="230" IsReadOnly="True"/>
+                            <!--<DataGridTextColumn Binding="{Binding recordTime,StringFormat=\{0:MM月dd日 HH:mm\}}" Header="时间" Width="150" IsReadOnly="True"/>-->
+                        </DataGrid.Columns>
+                    </DataGrid>
+                </Grid>
+            </Border>
+
+            <!--日志信息-->
+            <Border Grid.Row="2" BorderThickness="2" CornerRadius="5" Background="White" Margin="5,0,5,0">
+                <Border.Effect>
+                    <DropShadowEffect Color="Gray" ShadowDepth="0" BlurRadius="5" Opacity="0.3" Direction="0"></DropShadowEffect>
+                </Border.Effect>
+                <Grid>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="2.5*"/>
+                        <RowDefinition Height="9*"/>
+
+                    </Grid.RowDefinitions>
+                    <Border Grid.Row="0" BorderBrush="CadetBlue" BorderThickness="0,0,0,0" CornerRadius="0" Background="Transparent" Margin="1,1,5,5" >
+                        <TextBlock Text="设备监控" FontSize="17" FontWeight="Bold" Foreground="#0288d1" VerticalAlignment="Center" HorizontalAlignment="Center"/>
+                    </Border>
+
+                    <!--日志信息-->
+                    <Border Grid.Row="1" BorderBrush="Green" BorderThickness="0" CornerRadius="5" Background="Transparent" Margin="1">
+                        <ListBox x:Name="listBox" ItemsSource="{Binding LogInfoListBox}" FontSize="14" Foreground="Gray" Background="Transparent" BorderBrush="Transparent" ScrollViewer.HorizontalScrollBarVisibility="Hidden" ScrollViewer.VerticalScrollBarVisibility="Hidden"/>
+                    </Border>
+                </Grid>
+            </Border>
+        </Grid>
+    </Border>
+</Window>
+

SlnMesnac.RfidUpload.UI/MainWindow.xaml.cs

@@ -0,0 +1,17 @@
+using SlnMesnac.RfidUpload.UI.viewModel;
+using System.Windows;
+
+namespace SlnMesnac.RfidUpload.UI
+{
+    /// <summary>
+    /// Interaction logic for MainWindow.xaml
+    /// </summary>
+    public partial class MainWindow : Window
+    {
+        public MainWindow()
+        {
+            InitializeComponent();
+            this.DataContext = new MainWindowViewModel();
+        }
+    }
+}

SlnMesnac.RfidUpload.UI/SlnMesnac.RfidUpload.UI.csproj

@@ -0,0 +1,19 @@
+<Project Sdk="Microsoft.NET.Sdk.WindowsDesktop">
+
+  <PropertyGroup>
+    <OutputType>WinExe</OutputType>
+    <TargetFramework>net6.0-windows</TargetFramework>
+    <UseWPF>true</UseWPF>
+  </PropertyGroup>
+
+  <ItemGroup>
+    <PackageReference Include="MvvmLightLibs" Version="5.4.1.1" />
+  </ItemGroup>
+
+  <ItemGroup>
+    <ProjectReference Include="..\SlnMesnac.RfidUpload.Business\SlnMesnac.RfidUpload.Business.csproj" />
+    <ProjectReference Include="..\SlnMesnac.RfidUpload.Model\SlnMesnac.RfidUpload.Model.csproj" />
+    <ProjectReference Include="..\SlnMesnac.RfidUpload.NLog\SlnMesnac.RfidUpload.NLog.csproj" />
+  </ItemGroup>
+
+</Project>

SlnMesnac.RfidUpload.UI/templates/style/resourceStyle.xaml

@@ -0,0 +1,424 @@
+<ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+                    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+                    xmlns:local="clr-namespace:SlnMesnac.RfidPrint">
+    <Style x:Key="Window" TargetType="Window">
+        <Setter Property="WindowStyle" Value="None"/>
+        <Setter Property="AllowsTransparency" Value="True"/>
+        <Setter Property="Background" Value="Transparent"/>
+    </Style>
+    <Style x:Key="BUTTON_MENUBAR" TargetType="Button">
+        <Setter Property="VerticalAlignment" Value="Top"/>
+        <Setter Property="HorizontalAlignment" Value="Right"/>
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="{x:Type Button}">
+                    <Grid  Width="{TemplateBinding Width}" Height="{TemplateBinding Height}">
+                        <Grid Name="g" Opacity="0" Background="LightGray"/>
+                        <Grid Name="grd" RenderTransformOrigin="0.5,0.5" Width="{TemplateBinding Width}" Height="{TemplateBinding Height}" Background="{TemplateBinding Background}" VerticalAlignment="Center" HorizontalAlignment="Center" >
+                            <Grid.RenderTransform>
+                                <TransformGroup>
+                                    <!--<RotateTransform x:Name="rotate" Angle="0"-->
+                                    <ScaleTransform x:Name="scale" ScaleX="0.8" ScaleY="0.8"/>
+                                </TransformGroup>
+                            </Grid.RenderTransform>
+                        </Grid>
+                        <ContentPresenter HorizontalAlignment="Left" VerticalAlignment="Center" />
+                    </Grid>
+                    <ControlTemplate.Triggers>
+                        <Trigger Property="IsMouseOver" Value="True">
+                            <Trigger.EnterActions>
+                                <BeginStoryboard >
+                                    <Storyboard>
+                                        <DoubleAnimation To="0.2"  Duration="0:0:0.2" Storyboard.TargetName="g" Storyboard.TargetProperty="Opacity" />
+                                        <DoubleAnimation To="1"  Duration="0:0:0.2" Storyboard.TargetName="scale" Storyboard.TargetProperty="ScaleX" />
+                                        <DoubleAnimation To="1"  Duration="0:0:0.2" Storyboard.TargetName="scale" Storyboard.TargetProperty="ScaleY" />
+                                    </Storyboard>
+                                </BeginStoryboard>
+                            </Trigger.EnterActions>
+                            <Trigger.ExitActions>
+                                <BeginStoryboard >
+                                    <Storyboard>
+                                        <DoubleAnimation To="0"  Duration="0:0:0.2" Storyboard.TargetName="g" Storyboard.TargetProperty="Opacity" />
+                                        <DoubleAnimation To="0.8"  Duration="0:0:0.2" Storyboard.TargetName="scale" Storyboard.TargetProperty="ScaleX" />
+                                        <DoubleAnimation To="0.8"  Duration="0:0:0.2" Storyboard.TargetName="scale" Storyboard.TargetProperty="ScaleY" />
+                                    </Storyboard>
+                                </BeginStoryboard>
+                            </Trigger.ExitActions>
+                        </Trigger>
+                    </ControlTemplate.Triggers>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+    </Style>
+    <Style x:Key="BUTTON_MENUBAR_PATH" TargetType="Button">
+        <Setter Property="VerticalAlignment" Value="Top"/>
+        <Setter Property="HorizontalAlignment" Value="Left"/>
+        <Setter Property="Foreground" Value="Gray" />
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="Auto"/>
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="{x:Type Button}">
+                    <Grid  Width="{TemplateBinding Width}" Height="{TemplateBinding Height}">
+                        <Grid Name="g" Background="LightGray" Opacity="0" />
+                        <Grid Name="grd"  Width="22" Height="22" Background="{TemplateBinding Background}" VerticalAlignment="Center" HorizontalAlignment="Center"/>
+                        <ContentPresenter VerticalAlignment="Center" HorizontalAlignment="Center" />
+                        <Path Width="10" Height="30" HorizontalAlignment="Right" VerticalAlignment="Center" Data="M3,10 L7,15 L3,20" Stroke="Gray" StrokeThickness="1"/>
+                    </Grid>
+                    <ControlTemplate.Triggers>
+                        <Trigger Property="IsMouseOver" Value="True">
+                            <Trigger.EnterActions>
+                                <BeginStoryboard >
+                                    <Storyboard>
+                                        <DoubleAnimation To="0.4"  Duration="0:0:0.2" Storyboard.TargetName="g" Storyboard.TargetProperty="Opacity" />
+                                    </Storyboard>
+                                </BeginStoryboard>
+                            </Trigger.EnterActions>
+                            <Trigger.ExitActions>
+                                <BeginStoryboard >
+                                    <Storyboard>
+                                        <DoubleAnimation Duration="0:0:0.2" Storyboard.TargetName="g" Storyboard.TargetProperty="Opacity" />
+                                    </Storyboard>
+                                </BeginStoryboard>
+
+                            </Trigger.ExitActions>
+                        </Trigger>
+                    </ControlTemplate.Triggers>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+    </Style>
+    <Style x:Key="BUTTON_MENUBAR_MINI" TargetType="Button">
+        <Setter Property="VerticalAlignment" Value="Top"/>
+        <Setter Property="HorizontalAlignment" Value="Right"/>
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="{x:Type Button}">
+                    <Grid  Width="{TemplateBinding Width}" Height="{TemplateBinding Height}" ClipToBounds="True">
+                        <Border Name="bdr" BorderBrush="LightGray" BorderThickness="2" Opacity="0">
+                            <Border.Effect>
+                                <DropShadowEffect x:Name="effect" BlurRadius="20" Opacity="0.8" ShadowDepth="0"  Color="LightGray"/>
+                            </Border.Effect>
+                        </Border>
+                        <Grid Width="{TemplateBinding Width}" Height="{TemplateBinding Height}" Background="{TemplateBinding Background}" VerticalAlignment="Center" HorizontalAlignment="Center" >
+
+                        </Grid>
+                    </Grid>
+                    <ControlTemplate.Triggers>
+                        <Trigger Property="IsMouseOver" Value="True">
+                            <Trigger.EnterActions>
+                                <BeginStoryboard >
+                                    <Storyboard>
+                                        <DoubleAnimation To="1"  Duration="0:0:0.3" Storyboard.TargetName="bdr" Storyboard.TargetProperty="Opacity" />
+                                    </Storyboard>
+                                </BeginStoryboard>
+                            </Trigger.EnterActions>
+                            <Trigger.ExitActions>
+                                <BeginStoryboard >
+                                    <Storyboard>
+                                        <DoubleAnimation To="0"  Duration="0:0:0.3" Storyboard.TargetName="bdr" Storyboard.TargetProperty="Opacity" />
+                                    </Storyboard>
+                                </BeginStoryboard>
+                            </Trigger.ExitActions>
+                        </Trigger>
+                    </ControlTemplate.Triggers>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+    </Style>
+
+    <Style x:Key="BUTTON_AGREE" TargetType="{x:Type Button}">
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="Button">
+                    <Border Name="bdr" CornerRadius="3" Opacity="1" Background="{TemplateBinding Background}" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="1">
+                        <!--可使用ContentPresenter代替-->
+                        <!--Foreground的值White可以替换为{TemplateBinding Foreground}-->
+                        <Label VerticalContentAlignment="Center" HorizontalContentAlignment="Center" Foreground="White" Content="{TemplateBinding Content}"/>
+                    </Border>
+                    <ControlTemplate.Triggers>
+                        <Trigger Property="IsMouseOver" Value="True">
+                            <Trigger.EnterActions>
+                                <BeginStoryboard >
+                                    <Storyboard>
+                                        <DoubleAnimation To="0.6"  Duration="0:0:0.2" Storyboard.TargetName="bdr" Storyboard.TargetProperty="Opacity" />
+                                    </Storyboard>
+                                </BeginStoryboard>
+                            </Trigger.EnterActions>
+                            <Trigger.ExitActions>
+                                <BeginStoryboard >
+                                    <Storyboard>
+                                        <DoubleAnimation To="1"  Duration="0:0:0.2" Storyboard.TargetName="bdr"  Storyboard.TargetProperty="Opacity" />
+                                    </Storyboard>
+                                </BeginStoryboard>
+                            </Trigger.ExitActions>
+                        </Trigger>
+                    </ControlTemplate.Triggers>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+    </Style>
+    <Style x:Key="BUTTON_DISAGREE" TargetType="{x:Type Button}">
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="Button">
+                    <Border CornerRadius="3" BorderBrush="#FFEBEBEB" BorderThickness="1">
+                        <Grid>
+                            <Border Name="bdr" CornerRadius="3" Background="Gray" Opacity="0"/>
+                            <Label VerticalContentAlignment="Center" HorizontalContentAlignment="Center" Foreground="{TemplateBinding Foreground}" Content="{TemplateBinding Content}"/>
+                        </Grid>
+                    </Border>
+                    <ControlTemplate.Triggers>
+                        <Trigger Property="IsMouseOver" Value="True">
+                            <Trigger.EnterActions>
+                                <BeginStoryboard >
+                                    <Storyboard>
+                                        <DoubleAnimation To="0.2"  Duration="0:0:0.2" Storyboard.TargetName="bdr" Storyboard.TargetProperty="Opacity" />
+                                    </Storyboard>
+                                </BeginStoryboard>
+                            </Trigger.EnterActions>
+                            <Trigger.ExitActions>
+                                <BeginStoryboard >
+                                    <Storyboard>
+                                        <DoubleAnimation To="0"  Duration="0:0:0.2" Storyboard.TargetName="bdr" Storyboard.TargetProperty="Opacity" />
+                                    </Storyboard>
+                                </BeginStoryboard>
+
+                            </Trigger.ExitActions>
+                        </Trigger>
+                    </ControlTemplate.Triggers>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+    </Style>
+
+
+    <SolidColorBrush x:Key="SOLIDCOLORBRUSH_LIGHT" Color="#FF6FD1FF"/>
+    <Color x:Key="COLOR_LIGHT" R="111" G="209" B="255" A="255" />
+
+
+    <Style x:Key="BUTTON_ELLIPSE" TargetType="{x:Type Button}">
+        <Setter Property="Cursor" Value="Hand"/>
+        <Setter Property="ToolTip" Value="下一步"/>
+
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="Button">
+                    <Border CornerRadius="15" Width="30" Height="30" Background="{DynamicResource SOLIDCOLORBRUSH_LIGHT}">
+                        <Border.Effect>
+                            <DropShadowEffect x:Name="effect" BlurRadius="7" Opacity="0.6" ShadowDepth="0"  Color="{DynamicResource COLOR_LIGHT}"/>
+                        </Border.Effect>
+                        <Grid>
+                            <Path Name="path" HorizontalAlignment="Left"  Margin="0,0,0,0" Data="M5,15 L 15,23 L24,9" Stroke="White" StrokeThickness="1"/>
+                            <Path Name="path2" HorizontalAlignment="Left" Opacity="0" Margin="0,0,0,0" Data="M5,15 H25 L17,7 M25,15 L17,22 " Stroke="White" StrokeThickness="1"/>
+                        </Grid>
+                    </Border>
+                    <ControlTemplate.Triggers>
+                        <Trigger Property="IsMouseOver" Value="True">
+                            <Trigger.EnterActions>
+                                <BeginStoryboard >
+                                    <Storyboard>
+                                        <DoubleAnimation To="0.9"  Duration="0:0:0.3" Storyboard.TargetName="effect" Storyboard.TargetProperty="Opacity" />
+                                        <DoubleAnimation To="15"  Duration="0:0:0.3" Storyboard.TargetName="effect" Storyboard.TargetProperty="BlurRadius" />
+                                        <DoubleAnimation To="0"  Duration="0:0:0.5" Storyboard.TargetName="path" Storyboard.TargetProperty="Opacity" />
+                                        <DoubleAnimation To="1"  Duration="0:0:0.5" BeginTime="0:0:0.3" Storyboard.TargetName="path2" Storyboard.TargetProperty="Opacity" />
+
+                                    </Storyboard>
+                                </BeginStoryboard>
+                            </Trigger.EnterActions>
+                            <Trigger.ExitActions>
+                                <BeginStoryboard >
+                                    <Storyboard>
+                                        <DoubleAnimation Duration="0:0:0.3" Storyboard.TargetName="effect" Storyboard.TargetProperty="Opacity" />
+                                        <DoubleAnimation Duration="0:0:0.3" Storyboard.TargetName="effect" Storyboard.TargetProperty="BlurRadius" />
+                                        <DoubleAnimation Duration="0:0:0.5" BeginTime="0:0:0.3" Storyboard.TargetName="path" Storyboard.TargetProperty="Opacity" />
+                                        <DoubleAnimation Duration="0:0:0.5" Storyboard.TargetName="path2" Storyboard.TargetProperty="Opacity" />
+
+                                    </Storyboard>
+                                </BeginStoryboard>
+
+                            </Trigger.ExitActions>
+                        </Trigger>
+                    </ControlTemplate.Triggers>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+
+    </Style>
+    
+    
+    <!--DataGrid样式-->
+    <Style TargetType="{x:Type DataGrid}">
+        <Setter Property="Background" Value="{DynamicResource {x:Static SystemColors.ControlBrushKey}}"/>
+        <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
+        <Setter Property="BorderBrush" Value="#FF688CAF"/>
+        <Setter Property="BorderThickness" Value="1"/>
+        <Setter Property="RowDetailsVisibilityMode" Value="VisibleWhenSelected"/>
+        <Setter Property="ScrollViewer.CanContentScroll" Value="true"/>
+        <Setter Property="ScrollViewer.PanningMode" Value="Both"/>
+        <Setter Property="Stylus.IsFlicksEnabled" Value="False"/>
+        <Setter Property="AutoGenerateColumns" Value="False"/>
+        <Setter Property="ColumnHeaderHeight" Value="50"/>
+        <Setter Property="FontSize" Value="20"/>
+        <Setter Property="RowHeight" Value="50"/>
+        <Setter Property="AlternationCount" Value="1"/>
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="{x:Type DataGrid}">
+                    <Grid>
+                        <Border Background="Transparent" CornerRadius="0">
+                            <Border.Effect>
+                                <DropShadowEffect ShadowDepth="0" Direction="0" Color="#FFDADADA"/>
+                            </Border.Effect>
+                        </Border>
+                        <Border BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}" Padding="{TemplateBinding Padding}" SnapsToDevicePixels="True">
+                            <ScrollViewer x:Name="DG_ScrollViewer" Focusable="false">
+                                <ScrollViewer.Template>
+                                    <ControlTemplate TargetType="{x:Type ScrollViewer}">
+                                        <Grid>
+                                            <Grid.ColumnDefinitions>
+                                                <ColumnDefinition Width="Auto"/>
+                                                <ColumnDefinition Width="*"/>
+                                                <ColumnDefinition Width="Auto"/>
+                                            </Grid.ColumnDefinitions>
+                                            <Grid.RowDefinitions>
+                                                <RowDefinition Height="Auto"/>
+                                                <RowDefinition Height="*"/>
+                                                <RowDefinition Height="Auto"/>
+                                            </Grid.RowDefinitions>
+                                            <Grid Background="Transparent" Grid.Column="1">
+                                                <Grid.Effect>
+                                                    <DropShadowEffect Direction="270" Color="#FFF3F3F3"/>
+                                                </Grid.Effect>
+                                            </Grid>
+                                            <Button Command="{x:Static DataGrid.SelectAllCommand}" Focusable="false" Style="{DynamicResource {ComponentResourceKey ResourceId=DataGridSelectAllButtonStyle, TypeInTargetAssembly={x:Type DataGrid}}}" Visibility="{Binding HeadersVisibility, ConverterParameter={x:Static DataGridHeadersVisibility.All}, Converter={x:Static DataGrid.HeadersVisibilityConverter}, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}" Width="{Binding CellsPanelHorizontalOffset, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}"/>
+                                            <DataGridColumnHeadersPresenter x:Name="PART_ColumnHeadersPresenter" Grid.Column="1" Visibility="{Binding HeadersVisibility, ConverterParameter={x:Static DataGridHeadersVisibility.Column}, Converter={x:Static DataGrid.HeadersVisibilityConverter}, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}"/>
+                                            <ScrollContentPresenter x:Name="PART_ScrollContentPresenter" CanContentScroll="{TemplateBinding CanContentScroll}" Grid.ColumnSpan="2" Grid.Row="1"/>
+
+                                            <ScrollBar x:Name="PART_VerticalScrollBar" Grid.Column="2" Maximum="{TemplateBinding ScrollableHeight}" Orientation="Vertical" Grid.Row="1" Visibility="{TemplateBinding ComputedVerticalScrollBarVisibility}" Value="{Binding VerticalOffset, Mode=OneWay, RelativeSource={RelativeSource TemplatedParent}}" ViewportSize="{TemplateBinding ViewportHeight}"/>
+                                            <Grid Grid.Column="1" Grid.Row="2">
+                                                <Grid.ColumnDefinitions>
+                                                    <ColumnDefinition Width="{Binding NonFrozenColumnsViewportHorizontalOffset, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}"/>
+                                                    <ColumnDefinition Width="*"/>
+                                                </Grid.ColumnDefinitions>
+                                                <ScrollBar x:Name="PART_HorizontalScrollBar" Grid.Column="1" Maximum="{TemplateBinding ScrollableWidth}" Orientation="Horizontal" Visibility="{TemplateBinding ComputedHorizontalScrollBarVisibility}" Value="{Binding HorizontalOffset, Mode=OneWay, RelativeSource={RelativeSource TemplatedParent}}" ViewportSize="{TemplateBinding ViewportWidth}"/>
+                                            </Grid>
+                                        </Grid>
+                                    </ControlTemplate>
+                                </ScrollViewer.Template>
+                                <ItemsPresenter SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}"/>
+                            </ScrollViewer>
+                        </Border>
+                    </Grid>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+        <Style.Triggers>
+            <MultiTrigger>
+                <MultiTrigger.Conditions>
+                    <Condition Property="IsGrouping" Value="true"/>
+                    <Condition Property="VirtualizingPanel.IsVirtualizingWhenGrouping" Value="false"/>
+                </MultiTrigger.Conditions>
+                <Setter Property="ScrollViewer.CanContentScroll" Value="false"/>
+            </MultiTrigger>
+        </Style.Triggers>
+    </Style>
+    <Style TargetType="DataGridColumnHeader">
+        <Setter Property="Background" Value="Transparent"/>
+        <Setter Property="VerticalContentAlignment" Value="Center"/>
+        <Setter Property="HorizontalContentAlignment" Value="Center"/>
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="DataGridColumnHeader">
+                    <Grid Background="{TemplateBinding Background}">
+                        <!--<Grid.ColumnDefinitions>
+                            <ColumnDefinition/>
+                            <ColumnDefinition Width="20"/>
+                        </Grid.ColumnDefinitions>-->
+                        <ContentPresenter Margin="20 0 0 0" VerticalAlignment="{TemplateBinding VerticalContentAlignment}" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}"/>
+                        <!--<TextBlock Grid.Column="1" x:Name="SortArrow" Visibility="Visible"   VerticalAlignment="Center" FontFamily="/DataGrid;component/Fonts/#FontAwesome"/>-->
+                    </Grid>
+                    <!--<ControlTemplate.Triggers>
+                        <Trigger Property="SortDirection" Value="Ascending">
+                            <Setter TargetName="SortArrow" Property="Visibility" Value="Visible" />
+                            <Setter TargetName="SortArrow" Property="Text" Value="&#xf160;" />
+                        </Trigger>
+                        <Trigger Property="SortDirection" Value="Descending">
+                            <Setter TargetName="SortArrow" Property="Visibility" Value="Visible" />
+                            <Setter TargetName="SortArrow" Property="Text" Value="&#xf161;" />
+                        </Trigger>
+                    </ControlTemplate.Triggers>-->
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+    </Style>
+    <Style TargetType="DataGridRow">
+        <Setter Property="Cursor" Value="Hand"/>
+        <Setter Property="Template" >
+            <Setter.Value>
+                <ControlTemplate TargetType="DataGridRow">
+                    <Grid >
+                        <Border x:Name="border" Background="{TemplateBinding Background}" BorderThickness="1" BorderBrush="Transparent"/>
+                        <DataGridCellsPresenter />
+                    </Grid>
+                    <ControlTemplate.Triggers>
+                        <Trigger Property="IsMouseOver" Value="True">
+                            <Setter Property="BorderBrush" TargetName="border"  Value="#00BCD4"/>
+                        </Trigger>
+                        <Trigger Property="IsSelected" Value="true">
+                            <Setter Property="BorderBrush" TargetName="border"  Value="#00BCD4"/>
+                        </Trigger>
+                    </ControlTemplate.Triggers>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+        <Style.Triggers>
+            <Trigger Property="ItemsControl.AlternationIndex"
+                         Value="0">
+                <Setter Property="Background" Value="Transparent" />
+            </Trigger>
+            <Trigger Property="ItemsControl.AlternationIndex"
+                         Value="1">
+                <Setter Property="Background" Value="Transparent" />
+            </Trigger>
+        </Style.Triggers>
+    </Style>
+    <Style TargetType="DataGridCell">
+        <Setter Property="Background" Value="Transparent"/>
+        <Setter Property="VerticalContentAlignment" Value="Center"/>
+        <Setter Property="HorizontalContentAlignment" Value="Center"/>
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="DataGridCell">
+                    <Grid Background="{TemplateBinding Background}">
+                        <ContentPresenter VerticalAlignment="{TemplateBinding VerticalContentAlignment}" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}"/>
+                    </Grid>
+                    <ControlTemplate.Triggers>
+                        <Trigger Property="IsSelected" Value="true">
+                            <Setter Property="Foreground" Value="Gray" />
+                        </Trigger>
+                    </ControlTemplate.Triggers>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+    </Style>
+
+    <!--TextBox样式-->
+    <Style TargetType="{x:Type TextBox}">
+        <Setter Property="Template">
+            <Setter.Value>
+                <ControlTemplate TargetType="{x:Type TextBox}">
+                    <Border  BorderThickness="1" Width="auto" Height="auto"  BorderBrush="CadetBlue">
+                        <Grid x:Name="grid" Background="Transparent">
+                            <ScrollViewer x:Name="PART_ContentHost" VerticalAlignment="Center" VerticalContentAlignment="Center" HorizontalAlignment="Center"/>
+                        </Grid>
+                    </Border>
+                </ControlTemplate>
+            </Setter.Value>
+        </Setter>
+    </Style>
+    
+    
+    <!--RadioButton样式-->
+
+</ResourceDictionary>

SlnMesnac.RfidUpload.UI/viewModel/MainWindowViewModel.cs

@@ -0,0 +1,285 @@
+using GalaSoft.MvvmLight;
+using GalaSoft.MvvmLight.Command;
+using Microsoft.AspNetCore.Mvc;
+using Microsoft.Extensions.Logging;
+using Microsoft.Win32;
+using MiniExcelLibs;
+using NLog;
+using SlnMesnac.RfidUpload.Business;
+using SlnMesnac.RfidUpload.Model;
+using System;
+using System.Collections;
+using System.Collections.Generic;
+using System.Collections.ObjectModel;
+using System.IO;
+using System.Linq;
+using System.Runtime.CompilerServices;
+
+namespace SlnMesnac.RfidUpload.UI.viewModel
+{
+    public class MainWindowViewModel : ViewModelBase
+    {
+        private readonly Logger logger = LogManager.GetCurrentClassLogger();
+        private readonly HandleBusiness _business = HandleBusiness.Instance;
+        private readonly SerialPortBusiness _serialPortBusiness = SerialPortBusiness.Instance;
+        private ObservableCollection<dynamic> listItems = new ObservableCollection<dynamic>();
+        private ObservableCollection<InstructionInfo> labelItems = new ObservableCollection<InstructionInfo>();
+
+        #region 参数定义
+
+        /// <summary>
+        /// 标签数量
+        /// </summary>
+        private int labelCountParam = 0;
+        public int LabelCountParam
+        {
+            get { return labelCountParam; }
+            set { labelCountParam = value;RaisePropertyChanged(() => LabelCountParam); }
+        }
+
+        private int rfidDeviceStatus = 0;
+        public int RfidDeviceStatus
+        {
+            get { return rfidDeviceStatus; }
+            set { rfidDeviceStatus = value; RaisePropertyChanged(nameof(RfidDeviceStatus)); }
+        }
+
+        /// <summary>
+        /// 日志打印ListBox
+        /// </summary>
+        private IEnumerable logInfoListBox;
+        public IEnumerable LogInfoListBox
+        {
+            get { return logInfoListBox; }
+            set { logInfoListBox = value; RaisePropertyChanged(() => LogInfoListBox); }
+        }
+
+        /// <summary>
+        /// 标签信息DataGrid
+        /// </summary>
+        private IEnumerable labelInfoDataGrid;
+
+        public IEnumerable LabelInfoDataGrid
+        {
+            get { return labelInfoDataGrid; }
+            set { labelInfoDataGrid = value; RaisePropertyChanged(() => LabelInfoDataGrid); }
+
+        }
+        #endregion
+
+        #region 事件定义
+
+        /// <summary>
+        /// 打开串口
+        /// </summary>
+        public RelayCommand OpenSerialPortCommand { get; set; }
+
+        /// <summary>
+        /// 关闭串口
+        /// </summary>
+        public RelayCommand CloseSerialPortCommand { get; set; }
+
+        /// <summary>
+        /// 导出文件
+        /// </summary>
+        public RelayCommand ExportFilesCommand { get; set; }
+        #endregion
+        /// <summary>
+        /// 清空列表
+        /// </summary>
+        public RelayCommand EmptyFilesCommand { get; set; }
+
+
+        public MainWindowViewModel()
+        {
+            logger.Info("初始化启动");
+            EmptyFilesCommand = new RelayCommand(EmptyFiles);
+            ExportFilesCommand = new RelayCommand(ExportFiles);
+            OpenSerialPortCommand = new RelayCommand(OpenSerialPort);
+            CloseSerialPortCommand = new RelayCommand(CloseSerialPort);
+
+            this.Init();
+            
+        }
+
+        private void Init()
+        {
+            //加载标签信息
+            _business.InstructionInfoDataGridEvent += info =>
+            {
+                RefreshLabelInfoDataGrid(info);
+            };
+
+            //加载解析日志
+            _business.RefreshLogMessageEvent += message =>
+            {
+                logger.Info(message);
+                PrintMessageToListBox(message);
+            };
+
+            //接收串口数据
+            _serialPortBusiness.ReceivedDataEvent += buffer =>
+            {
+                //粘包数据处理
+                List<byte[]> dataPackages = _business.SplitPackets(buffer);
+
+                foreach (byte[] package in dataPackages)
+                {
+                    _business.LabelHandle(package);
+                    LabelCountParam += 1;
+                }
+            };
+
+            //加载串口通讯日志
+            _serialPortBusiness.RefreshLogMessageEvent += message =>
+            {
+                logger.Info(message);
+                PrintMessageToListBox(message);
+            };
+        }
+
+
+        /// <summary>
+        /// 打开串口通讯
+        /// </summary>
+        private void OpenSerialPort()
+        {
+            try
+            {
+                //LabelTest();
+                _serialPortBusiness.Open();
+                if (rfidDeviceStatus != 1)
+                {
+                    RfidDeviceStatus = 1;
+                }
+            }
+            catch (Exception e)
+            {
+                PrintMessageToListBox($"串口通讯打开异常:{e.Message}");
+            }
+        }
+
+        /// <summary>
+        /// 关闭串口通讯
+        /// </summary>
+        private void CloseSerialPort()
+        {
+            try
+            {
+                _serialPortBusiness.Close();
+                if (rfidDeviceStatus != 2)
+                {
+                    RfidDeviceStatus = 2;
+                }
+            }
+            catch (Exception e)
+            {
+                PrintMessageToListBox($"串口通讯关闭异常:{e.Message}");
+            }
+        }
+
+        /// <summary>
+        /// 导出文件
+        /// </summary>
+        private void ExportFiles()
+        {
+            try
+            {
+                var info = labelItems.ToList();
+
+                // 创建 SaveFileDialog 对象
+                SaveFileDialog saveFileDialog = new SaveFileDialog();
+                saveFileDialog.Filter = "Excel文件 (*.xlsx)|*.xlsx|所有文件 (*.*)|*.*";
+                saveFileDialog.Title = "保存文件";
+                saveFileDialog.FileName = $"标签信息{DateTime.Now.Date:yyyy-MM-dd}.xlsx";
+
+                if (saveFileDialog.ShowDialog() == true)
+                {
+                    string filePath = saveFileDialog.FileName;
+                    MiniExcel.SaveAs(filePath, info);
+                    PrintMessageToListBox($"标签数据导出成功:{filePath}");
+                    
+                }
+            }
+            catch(Exception ex)
+            {
+                PrintMessageToListBox($"标签数据导出异常:{ex.Message}");
+                logger.Error($"标签数据导出异常", ex);
+            }
+        }
+
+        /// <summary>
+        /// 清空标签信息列表
+        /// </summary>
+        private void EmptyFiles()
+        {
+            labelItems.Clear();
+            LabelCountParam = 0;
+        }
+
+        /// <summary>
+        /// 加载标签信息DataGrid
+        /// </summary>
+        /// <param name="labelInfos"></param>
+        private void RefreshLabelInfoDataGrid(InstructionInfo instructionInfo)
+        {
+            if (instructionInfo == null) return;
+            App.Current.Dispatcher.BeginInvoke((Action)(() =>
+            {
+                labelItems.Add(instructionInfo);
+
+                LabelInfoDataGrid = labelItems;
+
+                LabelCountParam += 1;
+            }));
+        }
+
+        /// <summary>
+        /// listBox绑定日志
+        /// </summary>
+        /// <param name="message"></param>
+        private void PrintMessageToListBox(string message)
+        {
+
+            lock (string.Empty)
+            {
+                try
+                {
+                    listItems.Add($"{DateTime.Now.ToString("HH:mm:ss")}==>{message}");
+
+                    LogInfoListBox = listItems.OrderByDescending(x => x);
+                }
+                catch (Exception ex)
+                {
+                    logger.Error("日志数据绑定异常", ex);
+                }
+            }
+        }
+
+        /// <summary>
+        /// 标签解析测试
+        /// </summary>
+        private void LabelTest()
+        {
+            // 模拟接收到的粘包数据
+            byte[] receivedData = {
+                0xAA, 0x55, 0x00, 0x1F, 0x31, 0x03, 0x45, 0x32, 0x30, 0x30, 0x33, 0x30, 0x33, 0x32, 0x37, 0x38, 0x31, 0x30, 0x30, 0x31, 0x35, 0x30, 0x30, 0x35, 0x39, 0x30, 0x44, 0x35, 0x35, 0x36, 0x2C,
+                0xAA, 0x55, 0x00, 0x1F, 0x31, 0x03, 0x45, 0x32, 0x30, 0x30, 0x33, 0x30, 0x33, 0x32, 0x37, 0x38, 0x31, 0x30, 0x30, 0x31, 0x35, 0x30, 0x30, 0x35, 0x39, 0x30, 0x44, 0x35, 0x35, 0x36, 0x2C,
+                0xAA, 0x55, 0x00, 0x1F, 0x31, 0x03, 0x45, 0x32, 0x30, 0x30, 0x33, 0x30, 0x33, 0x32, 0x37, 0x38, 0x31, 0x30, 0x30, 0x31, 0x35, 0x30, 0x30, 0x35, 0x39, 0x30, 0x44, 0x35, 0x35, 0x36, 0x2C,
+                0xAA, 0x55, 0x00, 0x1F, 0x31, 0x03, 0x45, 0x32, 0x30, 0x30, 0x33, 0x30, 0x33, 0x32, 0x37, 0x38, 0x31, 0x30, 0x30, 0x31, 0x35, 0x30, 0x30, 0x35, 0x39, 0x30, 0x44, 0x35, 0x35, 0x36, 0x2C,
+                0xAA, 0x55, 0x00, 0x27, 0x31, 0x03, 0x46, 0x43, 0x31, 0x30, 0x30, 0x38, 0x32, 0x30, 0x32, 0x30, 0x30
+            };
+
+
+            //粘包数据的处理
+            List<byte[]> dataPackages = _business.SplitPackets(receivedData);
+
+            // 打印处理后的数据包
+            foreach (byte[] package in dataPackages)
+            {
+                _business.LabelHandle(package);
+                //LabelCountParam += 1;
+            }
+        }
+    }
+}

SlnMesnac.RfidUpload.sln

@@ -0,0 +1,61 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 16
+VisualStudioVersion = 16.0.34031.81
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "SlnMesnac.RfidUpload.Analysis", "SlnMesnac.RfidUpload.Analysis\SlnMesnac.RfidUpload.Analysis.csproj", "{774D0204-DA0E-4C3B-BD2B-E40657C8E895}"
+EndProject
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "SlnMesnac.RfidUpload.Model", "SlnMesnac.RfidUpload.Model\SlnMesnac.RfidUpload.Model.csproj", "{E387466F-73C3-42E4-A5BB-6E88225F73C3}"
+EndProject
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "SlnMesnac.RfidUpload.Common", "SlnMesnac.RfidUpload.Common\SlnMesnac.RfidUpload.Common.csproj", "{B9C60040-62DC-4C88-AADA-C33C1900E54F}"
+EndProject
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "SlnMesnac.RfidUpload.Business", "SlnMesnac.RfidUpload.Business\SlnMesnac.RfidUpload.Business.csproj", "{B71F1EAB-C9D3-407C-9B2A-968E18D6F03F}"
+EndProject
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "SlnMesnac.RfidUpload.TouchSocket", "SlnMesnac.RfidUpload.TouchSocket\SlnMesnac.RfidUpload.TouchSocket.csproj", "{2ED3FBB5-DFE5-4557-B67B-3013F4E6649F}"
+EndProject
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "SlnMesnac.RfidUpload.NLog", "SlnMesnac.RfidUpload.NLog\SlnMesnac.RfidUpload.NLog.csproj", "{6128090B-8F42-4F22-A27E-6F5FF6072D27}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "SlnMesnac.RfidUpload.UI", "SlnMesnac.RfidUpload.UI\SlnMesnac.RfidUpload.UI.csproj", "{600503B8-7174-4A34-A38F-F4CFFAA6764F}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{774D0204-DA0E-4C3B-BD2B-E40657C8E895}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{774D0204-DA0E-4C3B-BD2B-E40657C8E895}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{774D0204-DA0E-4C3B-BD2B-E40657C8E895}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{774D0204-DA0E-4C3B-BD2B-E40657C8E895}.Release|Any CPU.Build.0 = Release|Any CPU
+		{E387466F-73C3-42E4-A5BB-6E88225F73C3}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{E387466F-73C3-42E4-A5BB-6E88225F73C3}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{E387466F-73C3-42E4-A5BB-6E88225F73C3}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{E387466F-73C3-42E4-A5BB-6E88225F73C3}.Release|Any CPU.Build.0 = Release|Any CPU
+		{B9C60040-62DC-4C88-AADA-C33C1900E54F}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{B9C60040-62DC-4C88-AADA-C33C1900E54F}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{B9C60040-62DC-4C88-AADA-C33C1900E54F}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{B9C60040-62DC-4C88-AADA-C33C1900E54F}.Release|Any CPU.Build.0 = Release|Any CPU
+		{B71F1EAB-C9D3-407C-9B2A-968E18D6F03F}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{B71F1EAB-C9D3-407C-9B2A-968E18D6F03F}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{B71F1EAB-C9D3-407C-9B2A-968E18D6F03F}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{B71F1EAB-C9D3-407C-9B2A-968E18D6F03F}.Release|Any CPU.Build.0 = Release|Any CPU
+		{2ED3FBB5-DFE5-4557-B67B-3013F4E6649F}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{2ED3FBB5-DFE5-4557-B67B-3013F4E6649F}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{2ED3FBB5-DFE5-4557-B67B-3013F4E6649F}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{2ED3FBB5-DFE5-4557-B67B-3013F4E6649F}.Release|Any CPU.Build.0 = Release|Any CPU
+		{6128090B-8F42-4F22-A27E-6F5FF6072D27}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{6128090B-8F42-4F22-A27E-6F5FF6072D27}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{6128090B-8F42-4F22-A27E-6F5FF6072D27}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{6128090B-8F42-4F22-A27E-6F5FF6072D27}.Release|Any CPU.Build.0 = Release|Any CPU
+		{600503B8-7174-4A34-A38F-F4CFFAA6764F}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{600503B8-7174-4A34-A38F-F4CFFAA6764F}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{600503B8-7174-4A34-A38F-F4CFFAA6764F}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{600503B8-7174-4A34-A38F-F4CFFAA6764F}.Release|Any CPU.Build.0 = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {E634670E-8F08-4B41-B9F5-4B2FF21EE441}
+	EndGlobalSection
+EndGlobal