diff --git a/SlnMesnac.WPF/MainWindow.xaml b/SlnMesnac.WPF/MainWindow.xaml
index 1a7421c..aa70509 100644
--- a/SlnMesnac.WPF/MainWindow.xaml
+++ b/SlnMesnac.WPF/MainWindow.xaml
@@ -69,7 +69,7 @@
-
+
diff --git a/SlnMesnac.WPF/MainWindow.xaml.cs b/SlnMesnac.WPF/MainWindow.xaml.cs
index 2139374..f2ac5d7 100644
--- a/SlnMesnac.WPF/MainWindow.xaml.cs
+++ b/SlnMesnac.WPF/MainWindow.xaml.cs
@@ -27,5 +27,7 @@ namespace SlnMesnac.WPF
this.DataContext = new MainWindowViewModel();
}
+
+
}
}
diff --git a/SlnMesnac.WPF/Page/DevMonitorPage.xaml b/SlnMesnac.WPF/Page/DevMonitorPage.xaml
index d7a2cfe..4b50059 100644
--- a/SlnMesnac.WPF/Page/DevMonitorPage.xaml
+++ b/SlnMesnac.WPF/Page/DevMonitorPage.xaml
@@ -67,13 +67,13 @@
-
-
+
+ ScrollViewer.VerticalScrollBarVisibility="Hidden" BorderThickness="0" CanUserAddRows="False" HorizontalAlignment="Center"
+ Foreground="#FFFFFF" >
@@ -82,9 +82,14 @@
-
-
+
+
+
+
+
+
+
@@ -95,13 +100,25 @@
-
+
+
+
+
+
+
+
+
+
-
-
-
-
+
+
+
@@ -111,8 +128,8 @@
-
-
+
+
-
-
-
-
-
-
+
+
+
+
diff --git a/SlnMesnac.WPF/Page/DevMonitorPage.xaml.cs b/SlnMesnac.WPF/Page/DevMonitorPage.xaml.cs
index 4fbec66..2be2bf9 100644
--- a/SlnMesnac.WPF/Page/DevMonitorPage.xaml.cs
+++ b/SlnMesnac.WPF/Page/DevMonitorPage.xaml.cs
@@ -19,6 +19,7 @@ using System.Windows.Media;
using System.Windows.Media.Imaging;
using System.Windows.Navigation;
using System.Windows.Shapes;
+using TouchSocket.Core;
namespace SlnMesnac.WPF.Page
{
@@ -66,24 +67,24 @@ namespace SlnMesnac.WPF.Page
{
try
{
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机MES屏蔽")) == false)
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机MES允许远程")) == false)
{
- MessageBox.Show("拆包机MES屏蔽，未切换远程");
+ MessageBox.Show("拆包机MES允许远程，未切换远程");
return;
}
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机MES屏蔽")) == false)
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机MES允许远程")) == false)
{
- MessageBox.Show("磁选机MES屏蔽，未切换远程");
+ MessageBox.Show("磁选机MES允许远程，未切换远程");
return;
}
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1MES屏蔽")) == false)
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1MES允许远程")) == false)
{
- MessageBox.Show("螺旋1MES屏蔽，未切换远程");
+ MessageBox.Show("螺旋1MES允许远程，未切换远程");
return;
}
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2MES屏蔽")) == false)
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2MES允许远程")) == false)
{
- MessageBox.Show("螺旋2MES屏蔽，未切换远程");
+ MessageBox.Show("螺旋2MES允许远程，未切换远程");
return;
}
@@ -97,23 +98,21 @@ namespace SlnMesnac.WPF.Page
#region 按顺序依次启动设备
- #region 1.拆包机
- plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机远程急停"), false);
- plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机远程停止"), false);
- SendPulseSignal("拆包机远程启动");
- #endregion
- Thread.Sleep(MachineSleep);
- #region 2.磁选机
- SendPulseSignal("磁选机一键启动");
- #endregion
- Thread.Sleep(MachineSleep);
- #region 3.螺旋
- plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1启动"), true);
- Thread.Sleep(MachineSleep);
- plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1启动"), true);
+ //1.螺旋2
+ bool Spiral2Status = StartSpiral2();
+ if (!Spiral2Status) return;
+
+ //2.磁选机
+ bool MagNetStatus = StartMagNet();
+ if (!MagNetStatus) return;
+
+ //3.螺旋1
+ bool Spiral1Status = StartSpiral1();
+ if (!MagNetStatus) return;
+
#endregion
- Thread.Sleep(MachineSleep);
- #region 4.烘干机
+
+ #region 烘干机
SendPulseSignal("烘干机螺旋启动");
Thread.Sleep(MachineSleep);
SendPulseSignal("烘干机风机启动");
@@ -121,7 +120,13 @@ namespace SlnMesnac.WPF.Page
SendPulseSignal("烘干机燃烧启动");
#endregion
+ #region 拆包机
+ plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机远程急停"), false);
+ plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机远程停止"), false);
+ SendPulseSignal("拆包机远程启动");
#endregion
+ Thread.Sleep(MachineSleep);
+
});
@@ -141,19 +146,46 @@ namespace SlnMesnac.WPF.Page
{
try
{
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机MES屏蔽")) == false)
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机MES允许远程")) == false)
{
- MessageBox.Show("拆包机MES屏蔽，未切换远程");
+ MessageBox.Show("拆包机MES允许远程，未切换远程");
return;
}
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机MES屏蔽")) == false)
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机MES允许远程")) == false)
{
- MessageBox.Show("磁选机MES屏蔽，未切换远程");
+ MessageBox.Show("磁选机MES允许远程，未切换远程");
+ return;
+ }
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1MES允许远程")) == false)
+ {
+ MessageBox.Show("螺旋1MES允许远程，未切换远程");
+ return;
+ }
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2MES允许远程")) == false)
+ {
+ MessageBox.Show("螺旋2MES允许远程，未切换远程");
return;
}
#region 依次按序停止
Task.Run(() =>
{
+ plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机远程启动"), false);
+ SendPulseSignal("拆包机远程停止");
+ Thread.Sleep(MachineSleep);
+
+ #region 烘干机
+ SendPulseSignal("烘干机螺旋停止");
+ Thread.Sleep(MachineSleep);
+ SendPulseSignal("烘干机燃烧停止");
+ Thread.Sleep(MachineSleep);
+ SendPulseSignal("烘干机风机停止");
+
+ plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1启动"), false);
+ Thread.Sleep(MachineSleep);
+ SendPulseSignal("磁选机一键停止");
+ Thread.Sleep(MachineSleep);
+ plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2启动"), false);
+ #endregion
});
#endregion
@@ -205,9 +237,9 @@ namespace SlnMesnac.WPF.Page
{
try
{
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机MES屏蔽")) == false)
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机MES允许远程")) == false)
{
- MessageBox.Show("拆包机MES屏蔽，未切换远程");
+ MessageBox.Show("拆包机MES允许远程，未切换远程");
return;
}
@@ -237,9 +269,9 @@ namespace SlnMesnac.WPF.Page
{
try
{
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机MES屏蔽")) == false)
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机MES允许远程")) == false)
{
- MessageBox.Show("拆包机MES屏蔽，未切换远程");
+ MessageBox.Show("拆包机MES允许远程，未切换远程");
return;
}
@@ -272,9 +304,9 @@ namespace SlnMesnac.WPF.Page
{
try
{
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机MES屏蔽")) == false)
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机MES允许远程")) == false)
{
- MessageBox.Show("磁选机MES屏蔽，未切换远程");
+ MessageBox.Show("磁选机MES允许远程，未切换远程");
return;
}
Task.Run(() =>
@@ -295,26 +327,7 @@ namespace SlnMesnac.WPF.Page
///
private void StopMagNetButton_Click(object sender, RoutedEventArgs e)
{
- try
- {
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机MES屏蔽")) == false)
- {
- MessageBox.Show("磁选机MES屏蔽，未切换远程");
- return;
- }
-
- Task.Run(() =>
- {
- // plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机一键启动"), false);
-
- SendPulseSignal("磁选机一键停止");
-
- });
- }
- catch (Exception ex)
- {
- _logger.LogError($"磁选停止:{ex.Message}");
- }
+ StartMagNet();
}
#endregion
@@ -327,19 +340,7 @@ namespace SlnMesnac.WPF.Page
///
private void StartSpiral1Button_Click(object sender, RoutedEventArgs e)
{
- try
- {
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1MES屏蔽")) == false)
- {
- MessageBox.Show("螺旋1MES屏蔽，未切换远程");
- return;
- }
- plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1启动"), true);
- }
- catch (Exception ex)
- {
- _logger.LogError($"螺旋1启动:{ex.Message}");
- }
+ StartSpiral1();
}
@@ -351,18 +352,7 @@ namespace SlnMesnac.WPF.Page
///
private void StartSpiral2Button_Click(object sender, RoutedEventArgs e)
{
- try
- {
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2MES屏蔽")) == false)
- {
- MessageBox.Show("螺旋2MES屏蔽，未切换远程");
- return;
- }
- plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2启动"), true);
- }catch (Exception ex)
- {
- _logger.LogError($"螺旋2启动:{ex.Message}");
- }
+ StartSpiral2();
}
///
@@ -374,9 +364,9 @@ namespace SlnMesnac.WPF.Page
{
try
{
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1MES屏蔽")) == false)
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1MES允许远程")) == false)
{
- MessageBox.Show("螺旋1MES屏蔽，未切换远程");
+ MessageBox.Show("螺旋1MES允许远程，未切换远程");
return;
}
plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1启动"), false);
@@ -396,9 +386,9 @@ namespace SlnMesnac.WPF.Page
{
try
{
- if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2MES屏蔽")) == false)
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2MES允许远程")) == false)
{
- MessageBox.Show("螺旋2MES屏蔽，未切换远程");
+ MessageBox.Show("螺旋2MES允许远程，未切换远程");
return;
}
plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2启动"), false);
@@ -540,5 +530,141 @@ namespace SlnMesnac.WPF.Page
_logger.LogError($"烘干机风机停止:{ex.Message}");
}
}
+
+
+ ///
+ /// 启动螺旋2
+ ///
+ private bool StartSpiral2()
+ {
+ bool result = false;
+ try
+ {
+
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2MES允许远程")) == false)
+ {
+ MessageBox.Show("螺旋2MES允许远程，未切换远程");
+ result = false;
+ }
+ else
+ {
+ int value2 = int.Parse(baseBusiness.GetPlcAddressByConfigKey("螺旋2速度值")) * 100;
+ plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2启动"), true);
+ plc.writeInt16ByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2速度设置"), value2);
+ Thread.Sleep(MachineSleep);
+ result = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2启动"));
+ }
+
+ }
+ catch (Exception ex)
+ {
+ MessageBoxAndLog($"螺旋2启动异常:{ex.Message}", true);
+ result = false;
+ }
+ return result;
+ }
+
+ ///
+ /// 启动磁选
+ ///
+ private bool StartMagNet()
+ {
+
+ try
+ {
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机MES允许远程")) == false)
+ {
+ MessageBox.Show("磁选机MES允许远程，未切换远程");
+ return false;
+ }
+ #region 启动磁选机 / 前提:check螺旋2启动及速度是否达标
+ int value2 = int.Parse(baseBusiness.GetPlcAddressByConfigKey("螺旋2速度值")) * 100;
+ bool startFlag = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2启动"));
+ int speed2 = plc.readInt16ByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2速度反馈"));
+ if (startFlag)
+ {
+ MessageBox.Show($"前提条件螺旋2未成功启动,请检查后重新启动");
+ return false;
+ }
+ if (speed2 < value2 * 0.8)
+ {
+ plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2启动"), false);
+ MessageBox.Show($"前提条件螺旋2速度{speed2}未达到设定值{value2}的下限阈值80%,请检查后重新启动");
+ return false;
+ }
+ SendPulseSignal("磁选机一键启动");
+ Thread.Sleep(MachineSleep);
+ #endregion
+ bool flag1 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机磁选启动"));
+ bool flag2 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机震动启动"));
+ if(flag1&& flag2)
+ {
+ return true;
+ }
+ else
+ {
+ MessageBoxAndLog("磁选机启动失败，请检查后设备状态后重新尝试",true);
+ return false;
+ }
+
+ }
+ catch (Exception ex)
+ {
+ MessageBoxAndLog($"磁选机启动异常:{ex.Message}", true);
+ return false;
+ }
+ }
+
+ ///
+ /// 启动螺旋1
+ ///
+ private bool StartSpiral1()
+ {
+ bool result = false;
+ try
+ {
+ if (plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1MES允许远程")) == false)
+ {
+ MessageBox.Show("螺旋1MES允许远程，未切换远程");
+ return false;
+ }
+ bool flag1 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机磁选启动"));
+ bool flag2 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机震动启动"));
+ if (!flag1 || !flag2)
+ {
+ MessageBoxAndLog("前提条件磁选机未启动，请先检查设备状态再启动", true);
+ return false;
+ }
+
+ int value1 = int.Parse(baseBusiness.GetPlcAddressByConfigKey("螺旋1速度值"));
+ plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1启动"), true);
+ plc.writeInt16ByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1速度设置"), value1 * 100);
+ Thread.Sleep(MachineSleep);
+ result = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2启动"));
+
+ }
+ catch (Exception ex)
+ {
+ MessageBoxAndLog($"螺旋1启动异常:{ex.Message}", true);
+ result = false;
+ }
+ return result;
+ }
+
+
+
+ private void MessageBoxAndLog(string message,bool isError = false)
+ {
+ if (isError)
+ {
+ _logger.LogError(message);
+ }
+ else
+ {
+ _logger.LogInformation(message);
+ }
+ MessageBox.Show(message);
+ }
+
}
}
diff --git a/SlnMesnac.WPF/ViewModel/DevMonitorViewModel.cs b/SlnMesnac.WPF/ViewModel/DevMonitorViewModel.cs
index 95c385d..c3c9f42 100644
--- a/SlnMesnac.WPF/ViewModel/DevMonitorViewModel.cs
+++ b/SlnMesnac.WPF/ViewModel/DevMonitorViewModel.cs
@@ -52,20 +52,34 @@ namespace SlnMesnac.WPF.ViewModel
public DevMonitorViewModel()
{
baseBusiness = App.ServiceProvider.GetService();
- plc = baseBusiness.GetPlcByKey("plc");
+
// _palletStowBusiness = App.ServiceProvider.GetService();
// _prodCompletionBusiness = App.ServiceProvider.GetService();
Task.Run(() =>
{
while (true)
{
- RefreshHotDataGrid();
- RefreshUnPackDataGrid();
- RefreshMagNetDataGrid();
- Thread.Sleep(50);
+ plc = baseBusiness.GetPlcByKey("plc");
+ if (plc != null)
+ {
+ RefreshHotDataGrid();
+ RefreshUnPackDataGrid();
+ RefreshMagNetDataGrid();
+ RefreshSpiralDataGrid();
+ }
+
+ Thread.Sleep(2000);
}
});
+
+ //Task.Run(() =>
+ //{
+ // Thread.Sleep(5000);
+ // plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("设备投料"), true);
+ // Thread.Sleep(300);
+ // plc.writeBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("设备投料"), false);
+ //});
//var palletTask = App.ServiceProvider.GetService>();
//RefreshPalletTaskDataGrid(palletTask);
@@ -116,6 +130,18 @@ namespace SlnMesnac.WPF.ViewModel
}
+ ///
+ /// 螺旋机DataGrid
+ ///
+ private ObservableCollection spiralDataGrid;
+
+ public ObservableCollection SpiralDataGrid
+ {
+ get { return spiralDataGrid; }
+ set { spiralDataGrid = value; RaisePropertyChanged(() => SpiralDataGrid); }
+
+ }
+
/////
///// 条码队列DataGrid
@@ -163,16 +189,57 @@ namespace SlnMesnac.WPF.ViewModel
try
{
HotDataGrid = new ObservableCollection();
- int hotStatus = plc.readByteByAddress(baseBusiness.GetPlcAddressByConfigKey("烘干机风机状态"));
- int hotStatus1 = plc.readByteByAddress(baseBusiness.GetPlcAddressByConfigKey("烘干机风机状态"));
- int hotStatus2 = plc.readByteByAddress(baseBusiness.GetPlcAddressByConfigKey("烘干机风机状态"));
+ int signal0 = plc.readByteByAddress(baseBusiness.GetPlcAddressByConfigKey("烘干机风机状态"));
+ int signal1 = plc.readByteByAddress(baseBusiness.GetPlcAddressByConfigKey("烘干机燃烧机状态"));
+ int signal2 = plc.readByteByAddress(baseBusiness.GetPlcAddressByConfigKey("烘干机螺旋状态"));
+
+ int signal3 = plc.readInt16ByAddress(baseBusiness.GetPlcAddressByConfigKey("烘干机烘干温度"));
+ int signal4 = plc.readInt16ByAddress(baseBusiness.GetPlcAddressByConfigKey("烘干机加热温度"));
+ int signal5 = plc.readInt16ByAddress(baseBusiness.GetPlcAddressByConfigKey("烘干机出气温度"));
+ int signal6 = plc.readInt16ByAddress(baseBusiness.GetPlcAddressByConfigKey("烘干机输出百分比"));
+ int signal7 = plc.readByteByAddress(baseBusiness.GetPlcAddressByConfigKey("烘干机报警"));
await App.Current.Dispatcher.BeginInvoke((Action)(() =>
{
HotDataGrid.Add(new PLCMachineModel()
{
Name = "烘干机风机状态",
- Value = ChangeHotStatus(hotStatus)
+ Value = ChangeHotStatus(signal0)
+ });
+ HotDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "烘干机燃烧机状态",
+ Value = ChangeHotStatus(signal1)
+ });
+ HotDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "烘干机螺旋状态",
+ Value = ChangeHotStatus(signal2)
+ });
+ HotDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "烘干机烘干温度",
+ Value = ((double)signal3 / 10).ToString()
+ }); ;
+ HotDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "烘干机加热温度",
+ Value = ((double)signal4 / 10).ToString()
+ });
+ HotDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "烘干机出气温度",
+ Value = ((double)signal5 / 10).ToString()
+ });
+ HotDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "烘干机输出百分比",
+ Value = signal6.ToString()
+ });
+ HotDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "烘干机报警",
+ Value = ChangeHotWarn(signal7)
});
}));
}catch (Exception ex)
@@ -193,6 +260,24 @@ namespace SlnMesnac.WPF.ViewModel
}
+ }
+
+ private string ChangeHotWarn(int status)
+ {
+
+ switch (status)
+ {
+ case 0: return "无"; break;
+ case 1: return "风机故障"; break;
+ case 2: return "燃烧机故障"; break;
+ case 3: return "传动故障"; break;
+ case 4: return "超温保护"; break;
+ case 5: return "烘干温度超温"; break;
+ case 6: return "温控模块通讯超时"; break;
+ default: return "未知"; break;
+
+ }
+
}
#endregion
@@ -204,8 +289,8 @@ namespace SlnMesnac.WPF.ViewModel
try
{
UnPackDataGrid = new ObservableCollection();
- int unPackStatus = plc.readByteByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机运行状态系统"));
- bool signal0 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机MES屏蔽"));
+ bool unPackStatus = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机运行状态系统"));
+ bool signal0 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机MES允许远程"));
bool signal1 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机远程启动"));
bool signal2 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机远程停止"));
bool signal3 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("拆包机远程急停"));
@@ -218,11 +303,11 @@ namespace SlnMesnac.WPF.ViewModel
UnPackDataGrid.Add(new PLCMachineModel()
{
Name = "拆包机运行状态系统",
- Value = ChangeUnPackStatus(unPackStatus)
- });
+ Value = unPackStatus.ToString()
+ }) ;
UnPackDataGrid.Add(new PLCMachineModel()
{
- Name = "拆包机MES屏蔽",
+ Name = "拆包机MES允许远程",
Value = signal0.ToString()
}) ;
UnPackDataGrid.Add(new PLCMachineModel()
@@ -296,7 +381,7 @@ namespace SlnMesnac.WPF.ViewModel
try
{
MagNetDataGrid = new ObservableCollection();
- bool signal0 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机MES屏蔽"));
+ bool signal0 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机MES允许远程"));
bool signal1 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机设备故障反馈"));
bool signal2 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机震动启动"));
bool signal3 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("磁选机磁选启动"));
@@ -306,7 +391,7 @@ namespace SlnMesnac.WPF.ViewModel
{
MagNetDataGrid.Add(new PLCMachineModel()
{
- Name = "磁选机MES屏蔽",
+ Name = "磁选机MES允许远程",
Value = signal0.ToString()
}) ;
MagNetDataGrid.Add(new PLCMachineModel()
@@ -341,5 +426,74 @@ namespace SlnMesnac.WPF.ViewModel
#endregion
+
+ #region 螺旋机参数监控
+ private async void RefreshSpiralDataGrid()
+ {
+ try
+ {
+ SpiralDataGrid = new ObservableCollection();
+ bool signal0 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1MES允许远程"));
+ bool signal1 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2MES允许远程"));
+ bool signal2 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1状态"));
+ bool signal3 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1变频器状态"));
+ bool signal4 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2状态"));
+ bool signal5 = plc.readBoolByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2变频器状态"));
+ int signal6 = plc.readInt16ByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋1速度反馈"));
+ int signal7 = plc.readInt16ByAddress(baseBusiness.GetPlcAddressByConfigKey("螺旋2速度反馈"));
+
+ await App.Current.Dispatcher.BeginInvoke((Action)(() =>
+ {
+ SpiralDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "螺旋1MES允许远程",
+ Value = signal0.ToString()
+ });
+ SpiralDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "螺旋2MES允许远程",
+ Value = signal1.ToString()
+ });
+ SpiralDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "螺旋1状态",
+ Value = signal2.ToString()
+ });
+ SpiralDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "螺旋1变频器状态",
+ Value = signal3.ToString()
+ });
+ SpiralDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "螺旋2状态",
+ Value = signal4.ToString()
+ });
+ SpiralDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "螺旋2变频器状态",
+ Value = signal5.ToString()
+ });
+ SpiralDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "螺旋1速度反馈",
+ Value = ((double)signal6 / 100).ToString()
+ });
+ SpiralDataGrid.Add(new PLCMachineModel()
+ {
+ Name = "螺旋2速度反馈",
+ Value = ((double)signal7 / 100).ToString()
+ });
+ }));
+ }
+ catch (Exception ex)
+ {
+ MessageBox.Show(ex.Message);
+ }
+
+ }
+
+ #endregion
+
}
}
diff --git a/SlnMesnac.WPF/appsettings.json b/SlnMesnac.WPF/appsettings.json
index 97899c4..d19bc1f 100644
--- a/SlnMesnac.WPF/appsettings.json
+++ b/SlnMesnac.WPF/appsettings.json
@@ -38,9 +38,9 @@
{
"configId": 1,
"plcType": "SiemensPlc",
- //"plcIp": "192.168.2.220",
- "plcIp": "127.0.0.1",
- "plcPort": 103,
+ "plcIp": "192.168.2.220",
+ // "plcIp": "127.0.0.1",
+ "plcPort": 102,
"plcKey": "plc",
"isFlage": true
},