using Mesnac.Compressor.Data;
using Mesnac.Compressor.Entity;
using System;
using System.Collections.Generic;
using System.Data;
using System.Linq;
using System.Text;

namespace Mesnac.Compressor.Station
{
    public class LastStation : NormarlStation, IStation
    {

        public bool PrepareWork(StationInfo station)
        {
            //判断当前工位MES开关是否打开
            bool iflag = IsOpen(station.stationID);
            if (iflag)
            {
                WorkTray tray = new WorkTray();
                //如果托盘是空的,直接放行，这里可能有个问题，PLC已经判断不是空托盘了，如果是空托盘肯定是系统数据有问题
                if (this.TrayIsNull(station, out tray))
                {
                    ICSharpCode.Core.LoggingService.Debug(station.StationCode + "检测到托盘未绑定");
                    this.DaoWeiQingQiuHandle(station, (int)DaoWeiResult.OK);
                    return true;
                }
                //判断当前工位是否已经合格
                //if (this.CurrentStationInfo(station, tray.RfidNum))
                //{
                //    ICSharpCode.Core.LoggingService.Debug(station.StationCode + "检测当前工位已合格");
                //    this.DaoWeiQingQiuHandle(station, (int)DaoWeiResult.NG);
                //    return false;
                //}

                bool ReSatrtWork = IsReStartWork(station);
                //如果是重投并且到了重做工位（此处并不是重投口，而是对应拆解台选择的重做工位）
                if (ReSatrtWork)
                {
                    //已经重投到了本工位,可以工作
                    //获取重投的工位号
                    string CurrentStationID = GetCurrentStationByRFID(tray.RfidNum);
                    if (int.Parse(station.stationID) < int.Parse(CurrentStationID))
                    {
                        ICSharpCode.Core.LoggingService.Debug(station.StationCode + "检测到未到重做工位");
                        this.DaoWeiQingQiuHandle(station, (int)DaoWeiResult.FangXing);
                        return false;
                    }
                    else if (int.Parse(station.stationID) == int.Parse(CurrentStationID))
                    {
                        ICSharpCode.Core.LoggingService.Debug(station.StationCode + "检测到已到重做工位");
                        this.DaoWeiQingQiuHandle(station, (int)DaoWeiResult.OK);
                        return false;
                    }
                    else if (int.Parse(station.stationID) > int.Parse(CurrentStationID))
                    {
                        //这里需要判断一下上工位开关是否打开
                        string preStationID = GetFirstStationIDByStationID(station.stationID);
                        bool iPreflag = IsOpen(preStationID);
                        if (iPreflag)
                        {
                            if (!this.PreStationInfo(station, tray.RfidNum))
                            {
                                ICSharpCode.Core.LoggingService.Debug(station.StationCode + "检测无上工位信息");
                                this.DaoWeiQingQiuHandle(station, (int)DaoWeiResult.PreNoWork);
                                return false;
                            }
                        }

                    }

                }
                else
                {
                    //这里需要判断一下上工位开关是否打开
                    string preStationID = GetFirstStationIDByStationID(station.stationID);
                    if (!string.IsNullOrEmpty(preStationID))
                    {
                        bool iPreflag = IsOpen(preStationID);
                        if (iPreflag)
                        {

                            //判断上一工位是否有工作信息
                            if (!this.PreStationInfo(station, tray.RfidNum))
                            {
                                ICSharpCode.Core.LoggingService.Debug(station.StationCode + "检测无上工位信息");
                                this.DaoWeiQingQiuHandle(station, (int)DaoWeiResult.PreNoWork);
                                return false;
                            }
                            //如果不是空托盘，判断当前是否合格f
                            if (tray.OKNG != 1)
                            {
                                ICSharpCode.Core.LoggingService.Debug(station.StationCode + "检测上工位信息不合格");
                                //这里要判断当前工位是否是NG拿取工位=====
                                if (station.NGTakeStation)
                                {
                                    this.DaoWeiQingQiuHandle(station, (int)DaoWeiResult.TakeNG);
                                    //托盘状态清空(这里加了当前工位重做逻辑，不需要清空)
                                    //UpdateTray(tray.RfidNum, tray.RfidNum, "", "", 0);
                                }
                                else
                                {
                                    this.DaoWeiQingQiuHandle(station, (int)DaoWeiResult.FangXing);
                                }
                                return false;
                            }

                        }
                    }
                }


            }
            this.DaoWeiQingQiuHandle(station, (int)DaoWeiResult.OK);
            return true;
        }
        public new bool HandleData(StationInfo station)
        {
            try
            {
                //保存数据
                base.SaveStationData(station,StationType.LastStation);
                UpdateTrace(station);

                
            }
            catch (Exception e)
            {
                ICSharpCode.Core.LoggingService.Error(e.ToString());
                return false;
            }

            finally
            {
                //这里要加一个OK放行
                FinishSavePLCWork(station);
            }

            return true;
        }

        public void UpdateTrace(StationInfo station)
        {
            StringBuilder sb = new StringBuilder();
            try
            {
                DbHandler db = new DbHandler();
                db.dbHelper.ClearParameter();
                db.dbHelper.CommandType = CommandType.Text;
                db.dbHelper.CommandText = "";

                string sql = "EXEC SP_Pro_SaveProductionInfo @RFID,@productid";
                db.dbHelper.AddParameter("@RFID", station.Data.RFIDNo);
                db.dbHelper.AddParameter("@productid", station.Data.machineID);
                db.dbHelper.CommandText = sql;
                db.dbHelper.ExecuteNonQuery();
                ICSharpCode.Core.LoggingService.Debug("结束工位更新条码信息"+ sql+"RFID"+ station.Data.RFIDNo+ "productid"+ station.Data.machineID);
            }
            catch (Exception e)
            {
                ICSharpCode.Core.LoggingService.Error("获取条码语句错误:" + sb.ToString() + "/r/n" + e.ToString());
                return;
            }

        }

    }
}